John Lewis JLWM 1203 Electrical connection, Permanent connection, Blue- Neutral Brown- Live

Page 11

Electrical connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

WARNING: THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability should this safety measure not be observed.

Should the appliance power supply cable need to be replaced, this must be carried out by a Service Force agent (see page 27).

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance’s rating plate. The rating plate is located at the top of the rim of the open door.

 

Mod

 

Prod. No

P0042 BD

Ser. No

 

The appliance is supplied with a 13amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS1363/A) fuse must be used.

Should the plug need to be replaced for any reason, proceed as described below.

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow

- Earth

Blue- Neutral

Brown- Live

GREEN & YELLOW

E

 

13 A

N

L

 

BROWN

BLUE

P1041

CORD CLAMP

 

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.The wire coloured green and yellow must be connected to the terminal marked with the letter

«E» or by the earth symbol or coloured green and yellow.

2.The wire coloured blue must be connected to the terminal marked «N» or coloured black.

3.The wire coloured brown must be connected to the terminal marked «L» or coloured red.

4.Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

WARNING:

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely.

The power supply cable must be easily accessible after installing the appliance.

The appliance should not be connected to the electrical supply by means of an extension cable.

Permanent connection

In the case of permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations.

The switch must not break the yellow and green earth cable at any point.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Jlwm Spin washing machine Use InstallationChild Safety Environmental Information Maintenance and Cleaning ServiceMaterials marked with the symbol are recyclable Ecological hintsContents Prewash Main wash Fabric softener Child safety featureDescription of the appliance Detergent dispenser drawerTechnical specifications InstallationPositioning Installation on a Suspended FloorUnpacking Appliance must be connected to a cold water supply PlumbingWater inlet Water drainageOnto a sink outlet spigot LevellingInterest of the environment Blue- Neutral Brown- Live «E» or by the earth symbol or coloured green and yellowElectrical connection Permanent connectionSpin speed Control panelDetergent dispenser drawer Programme selector dial Spin buttonExtra rinse button Programme options buttonsPrewash / Rinse hold / Stain button Intensive buttonFollowing pieces of information are shown on the display Delay start, a time value indicated in hoursDisplay Wash time Start/Pause buttonCancelling the delayed start Delay start buttonAcoustic Signal Selecting the delayed startCompartment marked Programme informationMeasure out the fabric softener Switch the machine onLoad the laundry Measure out the detergentSelect the desired options Select the Delay startHow to change an option or a programme during its cycle Select the spin speed or None optionLeave the door ajar in order to air the washing machine How to interrupt a programmeEnd of programme Bath robe Hints & tips on washing1000g = 1 kg SheetImportant Notes Wash care symbolsWashing programmes Soak Off / ResetProgramme Consumptions DescriptionMaintenance and cleaning Screw the pump cover fully Close the pump door Cleaning the water inlet filterEmergency emptying out Remove any objects from the pump impeller by rotating itSomething not working Light has gone out Machine vibrates whenSpinning Door will not open19/07 132 972

JLWM 1203 specifications

The John Lewis JLWM 1203 is a washing machine designed to cater to the diverse needs of modern households. Known for its performance, efficiency, and user-friendly features, the JLWM 1203 stands out in the competitive market of home appliances.

One of the key highlights of the JLWM 1203 is its energy efficiency. Rated with an A+++ energy efficiency label, it consumes less electricity compared to older models, significantly reducing energy bills while simultaneously being kinder to the environment. This is complemented by its large load capacity, accommodating up to 8 kg of laundry, making it an ideal choice for families or individuals who do larger loads less frequently.

The washing machine offers a range of wash programs to handle different fabric types and soil levels. Whether it’s delicate fabrics requiring gentle care or heavily soiled items that need a more robust wash, the JLWM 1203 has a program tailored to suit specific needs. Features such as quick wash options allow users to clean lightly soiled garments in a fraction of the time, making it a versatile choice for those with busy lifestyles.

Another remarkable feature of the JLWM 1203 is its advanced spin technology. With a maximum spin speed of 1200 RPM, it effectively removes excess water from laundry, resulting in shorter drying times and less energy consumption in the drying process. This is particularly beneficial for households with limited drying space or those relying on a tumble dryer.

The JLWM 1203 also incorporates a range of modern technologies that enhance user convenience. Its digital display provides easy access to various settings, remaining straightforward and intuitive. The delay start option is another advantageous feature, allowing users to set the machine to start washing at a more convenient time, contributing to energy savings during off-peak hours.

In terms of build quality, the JLWM 1203 features a robust design aimed at long-term reliability. With a sleek exterior and user-friendly interface, it seamlessly fits into any kitchen or laundry area, providing both functionality and aesthetics.

Overall, the John Lewis JLWM 1203 is an excellent investment for those seeking a dependable, efficient, and user-friendly washing machine. Its blend of modern features, energy savings, and thoughtful design makes it a standout product in its category, catering to contemporary laundry needs.
Top Page Image Contents