John Lewis JLWM 1203 instruction manual Door lock light, Delay start button, Acoustic Signal

Page 15

If an incorrect option is selected, the red pilot light for the Start/ Pause button flashes 3 times and the message Err is displayed for about 2 seconds.

Important! You must set the washing machine to Pause before you make any change in the programme in progress.

10 “Door lock” light

This pilot light illuminates to indicate that the appliance starts operating and the door is locked. It stays on during the whole programme.

When the light goes out, the door can be opened.

Door lock

Start/Pause

The “Door lock” pilot light indicates if the door can be opened:

•light on: the door cannot be opened. The appliance is running.

•light off: the door can be opened. The washing programme is finished.

When you PAUSE the cycle, you can open the door, provided:

•the washing machine is not in the heating phase;

•the level of the water is not high;

If all these requirements are met, the “Door lock” light goes off.

11 “Delay start” button

Before you start the programme, if you wish to delay the start, press the Delay Start button repeatedly, to select the desired delay. The relevant light will illuminate.

The selected delay time value (up to 20 hours) will appear on the display for about 3 seconds, then the duration of the programme will appear again.

The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button.

If you wish to add laundry to the machine during the delay time press Start/Pause button to put the machine in pause. Add the laundry, close the door and press the Start/Pause button again.

You can cancel the delay time at any moment, before you press the Start/Pause button.

Selecting the delayed start

You must select this option after you have set the programme and before you press the Start/Pause button.

•Select the programme and the required options.

•Select the delay start.

•Press Start/Pause button: the machine starts its hourly countdown.

The programme will start after the selected delay has expired.

Cancelling the delayed start

•Press Start/Pause button.

•Press “Delay start” button once until the symbol «0’» is displayed.

•Press “Start/Pause button again.

The Delay Start cannot be selected with “Drain” programme.

Important!

The door will be locked throughout the delay time. If you need to open the door, you must first set the washing machine to Pause by pressing the Start/Pause button. After you have closed the door, press the Start/Pause button again.

Acoustic Signal

At the end of a washing cycle and in case of operating problems, an acoustic signal will sound.

You can deactivate the acoustic signal by pressing the "Intensive" and the "Extra rinse" buttons simultaneously for about 5 seconds.

By pressing these buttons again the acoustic signal is reactivated.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Jlwm Spin washing machine Installation Child SafetyUse Environmental Information Maintenance and Cleaning ServiceMaterials marked with the symbol are recyclable Ecological hintsContents Prewash Main wash Fabric softener Child safety featureDescription of the appliance Detergent dispenser drawerTechnical specifications InstallationInstallation on a Suspended Floor UnpackingPositioning Appliance must be connected to a cold water supply PlumbingWater inlet Water drainageOnto a sink outlet spigot LevellingInterest of the environment Blue- Neutral Brown- Live «E» or by the earth symbol or coloured green and yellowElectrical connection Permanent connectionSpin speed Control panelDetergent dispenser drawer Programme selector dial Spin buttonExtra rinse button Programme options buttonsPrewash / Rinse hold / Stain button Intensive buttonFollowing pieces of information are shown on the display Delay start, a time value indicated in hoursDisplay Wash time Start/Pause buttonCancelling the delayed start Delay start buttonAcoustic Signal Selecting the delayed startCompartment marked Programme informationMeasure out the fabric softener Switch the machine onLoad the laundry Measure out the detergentSelect the desired options Select the Delay startHow to change an option or a programme during its cycle Select the spin speed or None optionHow to interrupt a programme End of programmeLeave the door ajar in order to air the washing machine Bath robe Hints & tips on washing1000g = 1 kg SheetImportant Notes Wash care symbolsWashing programmes Soak Off / ResetProgramme Consumptions DescriptionMaintenance and cleaning Screw the pump cover fully Close the pump door Cleaning the water inlet filterEmergency emptying out Remove any objects from the pump impeller by rotating itSomething not working Light has gone out Machine vibrates whenSpinning Door will not open19/07 132 972

JLWM 1203 specifications

The John Lewis JLWM 1203 is a washing machine designed to cater to the diverse needs of modern households. Known for its performance, efficiency, and user-friendly features, the JLWM 1203 stands out in the competitive market of home appliances.

One of the key highlights of the JLWM 1203 is its energy efficiency. Rated with an A+++ energy efficiency label, it consumes less electricity compared to older models, significantly reducing energy bills while simultaneously being kinder to the environment. This is complemented by its large load capacity, accommodating up to 8 kg of laundry, making it an ideal choice for families or individuals who do larger loads less frequently.

The washing machine offers a range of wash programs to handle different fabric types and soil levels. Whether it’s delicate fabrics requiring gentle care or heavily soiled items that need a more robust wash, the JLWM 1203 has a program tailored to suit specific needs. Features such as quick wash options allow users to clean lightly soiled garments in a fraction of the time, making it a versatile choice for those with busy lifestyles.

Another remarkable feature of the JLWM 1203 is its advanced spin technology. With a maximum spin speed of 1200 RPM, it effectively removes excess water from laundry, resulting in shorter drying times and less energy consumption in the drying process. This is particularly beneficial for households with limited drying space or those relying on a tumble dryer.

The JLWM 1203 also incorporates a range of modern technologies that enhance user convenience. Its digital display provides easy access to various settings, remaining straightforward and intuitive. The delay start option is another advantageous feature, allowing users to set the machine to start washing at a more convenient time, contributing to energy savings during off-peak hours.

In terms of build quality, the JLWM 1203 features a robust design aimed at long-term reliability. With a sleek exterior and user-friendly interface, it seamlessly fits into any kitchen or laundry area, providing both functionality and aesthetics.

Overall, the John Lewis JLWM 1203 is an excellent investment for those seeking a dependable, efficient, and user-friendly washing machine. Its blend of modern features, energy savings, and thoughtful design makes it a standout product in its category, catering to contemporary laundry needs.
Top Page Image Contents