A&D BT-Ci, UA-767 instruction manual Symbols, Function / Meaning, Recommended Action

Symbols

	Symbols					Function / Meaning	Recommended Action
						Standby and power on.
						Battery installation guide
						Direct current
						Type BF: Device, cuff and tubing are
						designed to provide special protection
						against electrical shocks.
						The indicator that appears while	Measurement is in
						measurement is in progress. It blinks	progress. Remain as still as
						when the pulse is detected.	possible.
						Irregular Heartbeat indicator. (I.H.B.)
						The indicator that appears when an
						irregular heartbeat or any excessive
						body movement is detected during the
						measurement.
						Previous measurements stored in
						MEMORY.
					Full Battery	The battery power indicator during the
						measurement.
						The indicator blinks when battery power	Replace all batteries with
					Low Battery		new ones, when the
						is low.
							indicator blinks.
						Unstable blood pressure due to	Try the measurement
							again. Remain very still
						movement during the measurement.
							during the measurement.
						The systolic and diastolic values are
						within 10 mmHg of each other.
						The pressure value did not increase	Fasten the cuff correctly,
						during inflation.
							and try the measurement
						The cuff is not fastened correctly.
							again.
PUL. DISPLAY ERROR						The pulse is not detected correctly.
						Pairing or unpairing has not been	Remove and re-insert the
							batteries. Try pairing or
						performed correctly.
							unpairing again.
						Pairing in progress
						Unpairing in progress
						Pairing or unpairing complete
			SYS			Systolic blood pressure in mmHg
			DIA			Diastolic blood pressure in mmHg.
		PUL./min				Pulse per minute
						EC directive medical device label
						R&TTE directive transmitter module label
						Manufacturer
						EU-representative
			EC	REP

English 5