John Lewis JLTDC01 instruction manual Control panel, Electronically controlled drying automatic

The control panel

12 11 10 9 8 7

1 2 3 4 5 6

1 Wool button

To select the Wool programme after setting the programme selector to WOOL/SILK. If no button is pressed, the Wool programme is automatically set.

6 Maintenance display

The related light comes up when

•the tank must be emptied or

•the filters must be cleaned.

2 Silk button

To select the SILK programme after setting the programme selector to WOOL/SILK.

3 Anti-crease button

The anti-crease phase at the end of the drying cycle is lengthened by 60 minutes. The laundry can be removed at any time during the anti-crease phase.

4 Alarm button

When the drying cycle has finished, an intermittent acoustic signal will sound, if this button has been pressed.

5 Start/Pause button

After having selected the programme and the options, press this button to start the dryer. The relevant light will stop flashing.

If you have choosen a delayed start, the machine will begin the count down.

If you want to interrupt the programme, press the START/ PAUSE button. To restart the drying cycle, press the START/ PAUSE button again.

7 Programme selector

The appliance will be switched on by turning the pro- gramme selector away from the OFF position to the left or to the right.

If the LIGHT position or a programme is selected, the inte- rior illumination is switched on if the door is opened. Electronically controlled or time controlled drying can be selected.

Electronically controlled drying (automatic)

The appliance runs these programmes with the help of sen- sors which detect the degree of dampness of the laundry.

Time controlled drying

This can be used to finish off drying if necessary. Select the 30 minutes programme for synthetics.

Cancelling a programme

To cancel a running drying programme, turn the programme selector to OFF.

10