IFB Appliances AW60-9021 Simple Installation, Installation of the water inlet hose

Page 4

SIMPLE INSTALLATION

Installation of the water inlet hose

1.

Check the tap mouth. If it is not even, it can be filed even.

2.

Screw loose the locking ring, but do not let the locking ring drop off. Screw the four screws at the same

 

distance.

3.

Put the universal connector into the tap and stick to the tap mouth at the most and then screw in the screws.

4.

Screw tight the locking ring to the right.

5.

Pull the skirt of one end of the water inlet hose downwards, and then plug in the universal connector. A sound of

 

"KA-TA" means proper connection.

SIMPLE INSTALLATION

Installation of drain hose

Nip the fixing ring with hand to make it loose and engaged on the drain hose and put the drain hose into the leading skirt of drain

hose in the bottom of the washing machine to the end at the most

(soak the head of the drain hose in warm water, it will make the engagement easy), and loose the fixing ring to let it clasp the drain hose.

It had better put the outlet of the drain hose into the nearby

Inner hose

Cabinet

Fixing ring

Drain hose

6.

Grasp the water inlet hose by hand and pull it downward to see whether it is secured

7.

Screw the nut on the other end of the water inlet hose into the water inlet of the washing machine to the most.

Tap

File

If the calibre of the tap

Locking ring

is big, the connecting

Connecting ring

ring can be taken off.

Skirt

Notices:

After end of inlet hose installation, do not immediately switch on the power. Open the tap and let water go over both ends of the inlet hose and check whether occur the leakage. If the inlet hose is difficult to install because of the tap , you can invite the experienced person for help.

The method of installation for the double water inlet hose is same.

drainage permanently, which can save the trouble that the drain

Leading ring

hose has to be connected each time before use. If the drainage is far from the washing machine, it can be solved by connection of the drain hoses head with end to extend.

Notices:

Drain faults will be caused when the drain hose is blocked.

5

6

Image 4
Contents Fully Automatic Washing Machine Features IndexSimple installation Names of Respective PartsInstallation of the water inlet hose Simple InstallationInstallation of drain hose Simple Installation &OPERATION Power source and groundingInstallation of the base cover Simple operationFunctions of Buttons Fully automatic program WAY of USEAdditional explanation Delay time program Confirmation of the delay and inspectionCancel the delay time, or alter the delay time Pre-wash of the dirty clothesWAY of USE & Method of Maintenance Trouble Shooting Weight standard of the clothesMethod Of Maintenance Following cases are not faults Cleaning of the lint filterPrecautions Other FunctionsPage Page Page 32 kg