Simple Installation &OPERATION

SIMPLE INSTALLATION

Power source and grounding

The washing machine employs alternative current with the rated voltage 230V and frequency 50 Hz. When the voltage fluctuates between 196V--252V, the washing machine can work normally. A special power socket to be provided beside the washing machine for convenience and safety. The method of connection of the socket is as the figure below:

Notices:

The socket and the grounding wire must be installed by an electrician to prevent incorrect installation or use of the socket, and to guarantee the safety of use of electricity.

The power wire of the washing machine employs Y connection and the replacement of the power wire should be carried out by professionals.

No connection of the grounding wire with the neutral wire, otherwise the cabinet will be charged, which is likely to cause the danger of electric shock.

Grounding wire

Rated voltage ~220V

Installation of the base cover

1.Slant the washing machine with angle of 45o in the direction of the arrows showed in the figure, put the side with the clasper to the washing machine and the other side to the ground, insert back lid along the

direction of the upper slot of the base from the back side of the washing machine.

2.Put the base cover straight to the point and then press the back lid

upward till there is a sound of "Gaba" and then screw in a self-tapping screw.

Slot

Base cover

Hole for Self-tapping screw

Simple operation

1.Before operation, please open the splash-free cover.

2.Put the clothes into washing tub and close the splash-free cover.

3.Put the detergent into the water inlet case.

4.Plug the cord into the socket, switch on the power.

5.Turnon the tap connected to the two water inlet hoses.

6.Press "Power" button.

7.Press "Start/Pause" button. The washing machine will go into operation automatically as

programmed.

Remark: If you want to set other programs, please see and read "Way of use".