IFB Appliances AW60-806 Names of Respective Parts and Simple Installation, Simple installation

Page 3

NAMES OF RESPECTIVE PARTS AND SIMPLE INSTALLATION

Names of respective parts

SIMPLE INSTALLATION

3.Use gradienter to check whether the washine machine is place flat.

4.After the adjustment the fixing pole should be screwed back and tight.

Notices:

If the washing machine is not placed flat (the inclination angle is over 2o), it may cause great vibration or automatic check and rectification or other abnormal circumstances will often take place in the course of spinning.

All foam packing including the fixing frame on the base foam in the step 2.

9

Loose

Base foam Fixing frame

Adjustable foot

8

7

1.

Top lid

2.Operation panel

3.Adjustable leg

4.Cabinet

5.

Drain hose

6.Top frame

7.Pulsator 8.Lint filter

9.Inner tub

Simple installation

Step 1:The washing machine should be placed inside the room with a flat floor, which is convenient for water supply and drain, has low moisture and no direct sunshine, and does not freeze in winter.

Step 2:All foam packing (including the fixing frame on the base foam) should be taken off, otherwise the washing machine will not work.

Step 3:Please adjust the washing machine even according to the instructions below to make the washing machine run steadily in low noise.

1.Loose the fixing pole on the adjusting foot, screw in or screw out the adjusting foot to make the four feet placed even on the floor.

2.When the floor is slanting or uneven, it is not easy to make even only by the adjusting foot. Then the rubber band can be added to the un-flat place.

Screw in

Fixing pole

Tight

Screw out

Bukly objects

Step 4: Installation of the water inlet hose

1. Check the tap mouth.If it is not even,it can be filed even.

2.Loosen the locking ring slightly , Screw the four screws into universal connector at the same distance.

3.Put the tap deeply into the universal connector then screw in the screws.

4.Screw tight the locking ring clockwise at the most.

5.Pull the skirt of one end of the water inlet hose downwards, and then plug in

the universal connector. A sound of KA-TA

means proper connection.

Tap

 

 

File

 

 

If the calibre of the tap

Connecting ring

Locking ring

is big, the connecting

 

ring can be taken off.

Skirt

Image 3
Contents Fully Automatic Washing Machine Features Features and AccessoriesNames of respective parts Names of Respective Parts and Simple InstallationSimple Installation Simple installationSimple operation Simple Installation and Simple OperationPower source and grounding Installation of the drain hoseBulky Wool Program Water levelAW60-806 Light/FlashDrain Water injectionTotal Operation Method Preset programConfirmation of the preset and inspection Cancel the preset, or alter the preset timeLoad size and the detergent Use the cleaning solution for twiceWeight standard of the clothes Pre-wash of dirty clothesSlot Following cases are not faultsSolution ClasperFunction of adjusting for unbalance Function of fault alarmSafe use of power Function of automatic power-offPage Page Page Rated Frequency 50Hz SpecificationsRated input power Rated voltage