OPERATION METHOD
Button operation steps
1.This washng machine has many extended functions, please operate it as per the below steps. Some of the functons of this washing machine if you don't want to operate, you only need to do is to skip it.
1.Operate the above mentioned steps range from "1" to "5".
2.Pressing program button to select the relevant programs that you choose to operate. 3.When choose delicate,fuzzy,last time,wool,the other functions can not be altered. 4.Pressing EF button to select the EF function.( Details of this function please refers to the EF operation steps).
5.Pressing water level buttom to select the appropriate water levels.
6.Pressing delay button to set the delay time.( Details of this function please refers to the delay operation steps).
7.Pressing "START/PAUSE' button to start the machine with the provision that the power is on, then close the top cover of the machine itself.
EF PROGRAME
1 
When "normal" program is selected, then"rinse" or"washing"are chosen at the same time, it is better to chose "energy saving" function.
2 
"Water saving" can be used to reduce rinse times when there is more than one time of rinse,
rinse times would be reduced by one time, at the same time, one time of spray is added.
3 
"Rinse hold"function is recommended to be chosen together with "spin". The washers buzzing
sound. Will remind you of recycling water at the last time of spin.
4. "Water saving" and "rinse hold" are not achievable at the same time.
Preset program
Preset time means the beginning time of washing.
1.Switch on "Power" button.
2.Open the tap and lay down the drain hose.
3.Load laundry and put detergent.
4.Select the proper water level according to the quantity of clothes.
5.Select the functions and programs.
6.Press "Preset" button to select the beginning time of washing.
7.Press "Start/Pause" button and close the lid.
Confirmation of the preset and inspection
After the preset is started, the corresponding light will be turned on, and other lights are
turned off.
After the preset is started, press "Preset" button continuously, you may see the selected
programs an the rest of the preset time. Loosen the button, the program will automatically come
back to preset status.
OPERATION METHOD
Cancel the preset, or alter the preset time
Before the program is started , the preset indicator lights, the preset time is selected from 1 to 48 hours,afer the preset time is set over 48 hours, the preset indicator is turned off , the function will be cancelled.
Press power switch to end program, and to cancel preset function at the same time. To change the preset time, please press "Power , and then press "Preset"
button to
Child-lock function
"preset " buttons means start of
accessible. Digital display shows "CL" every five seconds. Press again,both
"Water level" and "Preset " to disable
Soak wash
1.Switch on the power, open the tap and lay down the drain hose.
2.Put in the washing and detergent, close the lid.
3.Select proper water level and programs according to the weight of clothes and the clothes's varieties.
4.Press the "FUNCTION" button, select "SOAK", the lights of "SOAK" "WASH" "RINSE""SPIN" will get turned on.
5.Press "START/PAUSE" button.
AIR DRY
The function is to dry clothes by air.The efficiency of air dry is about 60%,and suggest 50% load in the tub for drying.