John Lewis JLWM1201, JLWM1402 Operating Sequence, Load the laundry, Measure out the detergent

Page 10

Operating Sequence

Before the first wash, we recommend that you pour 2 litres

of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.

Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.

WASHING 6 KG OF WHITE COTTON AT 90°C

Suppose you have 6 kg of heavy soiled laundry to wash. It is white cotton and is suitable for high temperature washing.

1.Load the laundry

Open the door. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.

P0004

2.Measure out the detergent

Pull out the dispenser drawer until it stops. Measure out the amount of detergent required and pour it into the main wash compartment .

If you wish to carry out the prewash, a soak programme or a stain phase, pour detergent or stain remover into the appropriate compartment marked

.

Important!

Do not use normal detergent for the “Stain” option, always use a STAIN remover.

3.Measure out the fabric softener

If required, pour fabric softener into the compartment marked , without exceeding the «MAX» mark.

Close the drawer gently.

4. Switch the machine on

Turn the selector dial to the 90° programme to switch the machine on. To switch the appliance off turn it to “Off”.

 

30 Minute wash

Off

90°

 

 

Drain

 

60°Cottons

 

Spin

 

Economy 60°

 

 

Softeners

 

Economy 40°

 

 

Rinse

 

40°

 

 

Soak 30°

 

30°

 

Wool

Cold

 

Cold

 

30°

 

60°

Synthetics

40°

 

Economy 40°

 

Delicates 30°

 

40°

 

 

Duvet 40°

 

Easy iron 40°

 

5.Select the desired programme/temperature

Turn the selector dial to the desired position. The lights relevant to the phases that form the programme will light up.

The display will show the duration of the selected programme, calculated on the basis of the maximum load for each type of fabric. The Start/Pause button light will start flashing.

If the load of laundry to be washed is small, at the beginning of the cycle the display will still indicate the duration relevant to the maximum load. The duration value will be gradually adjusted during the cycle.

 

Prewash

 

Wash

 

Rinse

2.05

Rinse hold

Spin

 

Drain

 

Filter

 

End

If your laundry needs a soak time, turn the programme selector dial to “Soak 30°” and then, before starting a washing cycle, drain the water as described in the “Soak 30°” paragraph.

C0111

C0112

10

Image 10
Contents JLWM1201 Spin washing machine JLWM1402 Child Safety InstallationUse Contents Interest Environment Materials marked with the symbol are recyclableEcological hints Machine works more economically if it is fully loadedDoor locked light Child safety featureDescription of the Appliance Detergent dispenser drawerSpin button Control PanelProgramme selector dial Option buttonsCancelling the delayed start Delay start buttonSelecting the delayed start Start/Pause buttonDisplay Programme phase indicator lightsFollowing pieces of information are shown on the display When the programme has finished, the End light comes on Programme informationLoad the laundry Switch the machine onOperating Sequence Measure out the detergentSelect the spin speed or the None option Select the Delay startHow to change an option or a programme during its cycle Select the desired optionsEnd of programme How to interrupt a programmeLeave the door ajar in order to air the washing machine Sheet Washing Hints1000g = 1 kg Bath robeWash Care Symbols Important NotesWashing programmes Energy Water Time Description Off / ResetProgramme Available Consumptions SoakMaintenance and Cleaning Remove any objects from the pump impeller by rotating it Cleaning the water inlet filterEmergency emptying out Screw the pump cover fully Close the pump doorSomething Not Working Door will not open Machine vibrates whenSpinning Light has gone outInstallation Instructions Technical SpecificationsInstallation on a Suspended Floor UnpackingAppliance must be connected to a cold water supply Water inletWater drainage Into a drainage standpipeInterest of the environment LevellingSpecial conditions Onto a sink outlet spigotElectrical connection Permanent connection