Fisher & Paykel WH80F60W, WH60F60W, WH70F60W Adjusting the feet, Connecting to the water supply

Page 7

Installation instructions

Adjusting the feet

■■In order for quiet and stable operation, the machine should be placed properly and levelled on its feet.

■■If the machine is unstable:

1 Loosen the plastic lock nut.

2 Screw or unscrew the adjustable foot until the machine stands firmly level. 3 Tighten the lock nut for stability.

Lock nut

Adjustable foot

Fig.2 Levelling foot adjustment

Note: adjust lock nuts by hand. Do not use any tools to loosen or tighten the lock nuts, as they can be damaged.

Connecting to the water supply

Important!

This washer connects to the cold water supply only.

Cold water should not exceed 35ºC.

■■Exceeding this temperature may cause the machine to fault or result in damage to the machine.

Water supply requirements

Inlet water pressure: Max. 1Mpa (145 psi) Min. 0.1MPa (14.5 psi).

Inlet water flow rate: Max. 80 litres/min. Min. 10 litres/min.

Image 7

Contents Installation instructions Page Contents Intended use Safety and warningsGeneral safety First useIf there are children in your house Safety instructionsPositioning the machine Installation instructionsRemoving the transit safety bolts Remove the packagingConnecting to the water supply Adjusting the feetWater supply requirements Inlet hoses Connecting the hoseElectrical connection Connecting to the drainPreparing clothes for washing Initial preparations for washingDetergent drawer Detergent, softener and other cleaning agentsDetergents and softeners Detergent quantitySTART/PAUSE and Cancel button ON/OFF button Using your machineControl panel Selecting a programme and operating your machine Corresponds to the capacity rating of your machine Quick wash Spin speed selectionAdditional function buttons Pre-washStarting the programme Time displayProgress of programme Door lock Pausing the programmeCancelling the programme Changing the selections after the programme has startedTo activate the child-proof lock Child-proof lockTo deactivate the child-proof lock Inlet water filters Care and cleaningTo remove and clean the detergent drawer and siphon Detergent drawerDrum and door seals Draining any remaining water and cleaning the pump filterHose DrumAfter the draining process is completed To clean the filter and discharge the waterSuggestions for solving problems TroubleshootingProblem Cause Models SpecificationsThis warranty does not cover Manufacturer’s WarrantyFisher & Paykel undertakes to Please keep this User Guide in a safe place For Australian CustomersAustralia if you need assistance Before you call for service or assistance…Customer Care New Zealand if you need assistanceDealer Suburb Town Country Product detailsNZ AU SG