•To install the speaker, first carefully remove the grille using a straightened paperclip or other pointed metal tool. Insert the point into one of the grille perforations near a corner and lift the grille free. Never use a knife or screwdriver to pry between the grille and the speaker frame. This will damage your speaker.
•Loosen the rotating wall clamps by unscrewing them. Make sure that the rotating wall clamps are flipped inwards so that your speaker fits into your cutout without nicking your wall. Then place the speaker carefully into the cutout [figure 12].
•Pour installer le
•Desserrez les crampons rotatifs en les dévissant.
FIGURE 11
Hook up the speaker wires.
Conecte los cables de los altavoces.
Branchez les fils de
Schließen Sie die Lautsprecherkabel an.
FIGURE 12
Place the speaker carefully into the cutout. Coloque cuidadosamente el altavoz en el agujero.
Placez délicatement le
Platzieren Sie die Lautsprecher vorsichtig in der ausgeschnittenen Öffnung.
FIGURE 13
Tighten retaining wall clamps to engage wall. Use a #2 Phillips head screwdriver or a powered screwdriver.
Apriete las prensas de retención de la pared para enganchar el altavoz a la pared. Use un destornillador Phillips No. 2 o un destornillador eléctrico.
Reserrez les attaches murales pour fixer solidement l’unité au mur. Utilisez un tournevis ou une perceuse à tête Phillips no 2.
Ziehen Sie die Wandklemmen fest, um das System an der Wand zu befestigen. Verwenden Sie dazu einen Kreuzschlitzschraubendreher (Nr. 2) oder einen Schraubendreher mit Motorantrieb.