Polk Audio TC265I, TC80I, TC65I, TC60I Follow These Easy Steps, Suivez CES Simples Etapes

Page 9

FOLLOW THESE EASY STEPS:

Make sure the material into which you plan to mount the speakers (plaster, drywall, paneling, stone, etc.) can support the weight of the speak- ers (see specification page for the weight of your model).

Make sure the locations you select do not con- ceal studs, electrical wiring or plumbing. Prior to installation, hold the speaker in your chosen location to make sure it safely clears obstacles such as studs, corners, beams, lighting fixtures and door/window frames. Your cutout must be at least 1" (25mm) from adjoining walls or ceil- ing, internal studs or plumbing.

Using the template, trace the installation loca- tion with a pencil. You can do this by holding the template in your preferred location and tracing around it. Use a level to make certain the tem- plate is straight and plumb. This is the exact cutout size.[figures 9a & 9b].

Carefully cut the hole with the appropriate cut- ting tool for your wall or ceiling material. Start the hole by drilling a hole on the inside of the tracing (with the drill bit touching the line). Use this hole to insert the saw or knife and begin cut- ting [figure 10].

Once you have cut the hole, fish your previously positioned wiring out of the hole and connect the speaker. Follow the hookup directions incl- ued with your receiver. Strip 1/2 inch (12 mm) of insulation from each of the two conductors of the wire to expose the bare metal and twist each of the conductors into a single unfrayed strand (so you have two unfrayed strands). Note that one of the terminals on the rear of each speaker is red (+) and the other is black (-). Make certain that you connect the wire from the red terminal (+) of your amplifier or receiver to the red terminal (+) on your speaker and the wire from the black terminal (-) of your amp- lifier or receiver to the black terminal (-) on your speaker. Most wire has some indicator (such as color-coding, ribbing or writing) on one of the two conductors to help you main- tain consistency [figure 11].

SUIVEZ CES SIMPLES ETAPES:

Assurez-vous que le matériau dans lequel vous comptez installer vos haut-parleurs (plâtre, pla- coplâtre, lambris, pierre, etc.) peut supporter le poids des haut-parleurs (voir la fiche technique pour le poids du modèle de vos haut-parleurs).

Assurez-vous que l’endroit choisi pour l'installa- tion murale ne dissimule pas de montants ou de solives, de fils électriques ou de plomberie. Avant son installation, tenez le haut-parleur à l’endroit choisi pour vous assurer qu’il sera suffisamment dégagé du plafond, des murs, des coins, des poutres, des luminaires et des cadres de portes et de fenêtres. L’embrasure doit être à au moins 25 mm (1 pouce) du mur ou du plafond adjacent, d’un montant ou d’une solive, ou de plomberie.

À l’aide du gabarit, tracez l’endroit de l’installa- tion avec un crayon. Vous pouvez accomplir cette besogne en tenant le gabarit à l’endroit choisi et en traçant tout autour. Utilisez un niveau pour vous assurer que le gabarit est bien droit et de niveau. C’est la taille exacte de l’embrasure. [figure 9a et 9b].

Pratiquez soigneusement l’embrasure avec l’outil approprié au matériau de votre mur ou plafond. Commencez en faisant un trou à l’intérieur du traçage (la mèche touchant le traçage). Utilisez ce trou pour insérer la scie ou le couteau et commencer la coupe [figure 10].

Une fois l’embrasure pratiquée, sortez-en le câble antérieurement installé et connectez-le au haut- parleur. Suivez les instructions de connexion fou- rnies avec votre récepteur. Retirez 12 mm (1/2 po) d’isolation de chacun des deux conducteurs pour exposer les brins métalliques et tordez les brins de chaque conducteur pour former deux torons non éraillés. Notez qu’une des bornes à l’arrière de chaque haut-parleur est rouge (+) et l’autre noire (-). Assurez-vous de bien raccorder le fil provenant de la borne rouge (+) de votre ampli- ficateur/récepteur à la borne rouge (+) de votre haut-parleur et le fil noir (-) provenant de la borne noire (-) de votre amplificateur/récepteur à la borne noire (-) de votre haut-parleur. La polar- ité de la plupart des fils à deux conducteurs est codée (couleur, nervure ou écriture) pour faciliter son identification [figure 11].

9Get more information and exclusive accessories, visit www.polkaudio.com

Image 9
Contents TCi Series Placement Options Ajustement DES Tweeters Adjusting the TweeterOrienter LE Tweeter Aiming the TweeterWall Distance Toggle Making Adjustments AjustementsYou will need Vous aurez besoin deAvec du papier et du ruban-cache Painting the Frame De la grille avec la peinture figurePainting the Grille Peinture DU CadreInstallation Un crayon pour marquer l’endroit de l’installationYOU will Need Vous Aurez Besoin DESuivez CES Simples Etapes Follow These Easy StepsFor Customer Service, call 800-377-7655 Ou plafond Safety FirstDu haut-parleur Securite Avant ToutTC60 TC80 SPECIFICATIONS/FICHE TechniquePolk Audio Limited Warranty Garantie Limitée DE Polk Audio Metro Drive BALTIMORE, Maryland 21215, USA

TC80I, TC65I, TC60I, TC265I specifications

Polk Audio has long been synonymous with high-quality audio equipment, and their in-ceiling speakers, the TC265i, TC60i, TC65i, and TC80i, continue this tradition of excellence. Each model is designed to deliver exceptional sound quality while seamlessly blending into your home environment.

The TC265i is a robust choice for those looking for a comprehensive audio experience. It features a 6.5-inch dynamic balance woofer, ensuring that low frequencies are reproduced with clarity and depth. The speaker is equipped with a 1-inch tweeter that provides crisp high-frequency sounds, making it perfect for both music and movie audio. With its Moisture Resistant materials, the TC265i is also ideal for use in bathrooms or kitchens, ensuring longevity in various environments.

Moving on to the TC60i, this model offers a more compact design while still delivering impressive sound. It features a 6.5-inch woofer and a 1-inch tweeter, providing a balanced sound profile that works well in smaller spaces. This model is particularly well-suited for home theater setups or as part of a multi-room audio system.

The TC65i takes things up a notch by combining aesthetic appeal with advanced audio technologies. It includes a 6.5-inch dynamic balance woofer and a 1-inch crisp tweeter, just like its predecessor, but boasts a more refined design. The Invisi-Ball swivel tweeter allows you to direct sound towards your listening area, enhancing soundstage and immersion.

Finally, the TC80i represents the pinnacle of Polk Audio's in-ceiling offerings. With an 8-inch woofer and a 1-inch tweeter, this model delivers deeper bass and more expansive sound. Its larger woofer makes it ideal for larger rooms or as part of a dedicated home theater system. The adjustable tweeter also aids in custom sound positioning, allowing users to tailor their audio experience to their specific needs.

All four models share a key characteristic: Polk Audio's exclusive Dynamic Balance technology, which minimizes distortion and produces accurate sound reproduction. The speakers also feature an easy-to-install design, with a paintable grille that allows homeowners to match their decor seamlessly. In summary, whether you opt for the TC265i, TC60i, TC65i, or TC80i, each model promises outstanding audio performance with advanced features and a commitment to quality. Their versatility makes them suitable for any home audio setup.