iis_8_!i,l,z_Siiii0 ,_i¸S!!!!;ii:ii:::::iii@Si4il;_%_q::iii}_ii_ii_,!!!!iil}ili
1.To pause the washer at any time, press the Start/Pause button.
2.To continue the cycle, press the Start/Pause button.
Not all Options are available with all Cycles.
Cycles and Options can be changed anytime before START is selected.
To stop a cycle and select a new cycle
1.Press the Start/Pause button.
2.Select desired cycle.
3.Select the desired OPTIONS.
4.Press the Start/Pause button to restart the washer at the beginning of the new cycle..
To cancel a cycle
1.Press the Start/Pause button.
2.The washer powers down, the door unlocks, and clothes can be removed.
NOTE: if the water level or the temperature is too high, the washer will drain automatically before the door unlocks.
To change Options after _e cycle has started
1.Press the Start/Pause button.
2.Select the desired OPTIONS. If the option is not available, the machine will beep.
,3. Press the Start/Pause button to continue the cycle.
To drain _e washer manually
1.Press the Start/Pause button.
2.Select SPIN ONLY.
,3. Press the Start/Pause button to begin the drain.
4.When the spin is complete, the door unlocks. Items can be removed from the washer.
You can add or take out laundry items even after the wash has started, as long as the "Garment+" light is on. Pushing the Start/ Pause button unlocks the door, unless the water is too hot or if there is too much water in your Washer. If you are able to unlock the door and wish to continue the wash cycle, close the door and press the Start/Pause button.
Locking conb'ols
This function prevents children from playing with your washer.
@
Activating the Child Lock function
Press and hold both the Soil Level and Cycle Signal buttons simultaneously for approximately 3 seconds.
If the Child Lock function is activated, the door is locked and the "Child Lock [@]" lamp is lit.
If the Start/Pause button is pressed after the Child Lock
function is activated, none of the buttons will work except for the Power button.
If a button is pressed when the buttons are locked.
Pausing the Child Lock function
When the door is locked or the buttons are locked by the Child Lock function, you can pause the Child Lock operation for 1 minute by pressing and holding both the Soil Level and Cycle Signal buttons simultaneously for approximately 3 seconds.
If Child Lock mode is paused temporarily, the door lock is released for 1 minute for user convenience. During this period.
oIf the door is opened after the minute is over, an alarm sounds for up to 2 minutes.
If the door is closed within the 2 minutes, the door is locked and the Child Lock function is reactivated. If the door is
closed after the 2 minutes, the door will not be locked automatically and no alarm will be heard.
Deactivating the Child Lock function
Press and hold both the Spin and Soil Level buttons simultaneously for approximately 6 seconds.
If the Child Lock function is deactivated, the door is unlocked.
Child Lock is a function to prevent children or the infant from accidently operating the washer and injuring themselves.
If a child enters the washing machine, the child may become trapped and suffocate.
16