OPERATING YOUR WASHER
UNDERSTANDING WHAT HAPPENS IN EACH CYCLE
When the Cycle Control knob is set to a number and pulled out, the washer fills (to the selected load size) before agitation and timing start. The washer begins agitating immediately after filling; agitation occurs with the washer lid up or down.
During agitation, the XTRA ROLL ACTION* agitator creates a continuous rollover action that pro-
vides a thorough cleaning of the wash load.
After agitation starts, the Cycle Control knob turns clockwise until it points to an Off area and the cycle ends.
NOTE: The washer pauses briefly throughout each cycle. These pauses are normal for washer operation.
Sequence of cycles
WASH
Fill
▼
Wash selected time
▼
Drain†
No agitation
▼
Spin
▼
†The Permanent Press cycle partially drains, fills, agitates briefly, and drains.
RINSE
Fill
▼
Rinse
▼
▼
▼
Spin
▼
Off
10