Whirlpool LA38OOXK warranty Before calling for service, If Your Washer does not Fill

Page 10

If You Need Service or Help, We suggest You Follow These Three Steps:

1. Before calling for service

Problems are sometimes caused by little thongs qcu con correct without tool: Check this st before you call for ser‘J+ce

IF YOUR WASHER DOES NOT FILL:

l Is tne power subply cord plugged In’ l Are both hsater faucets open7

ls a fclse blotin or clrcul+-breaker -rippec^

l 4re the \vater suop~y hoses kl-lkedy l s the Cycse CorVol Knob set and bulled cut’

IF YOUR WASHER DOES NOT SPIN:

lIs the Ild closed’

l Is the pcwer supply corl plugged In7 l Is a fuse blown or crrcult-breaker trooped?

IF WASHER FILLS AND DRAINS WITHOUT RUNNING:

l Make sure that the Cycle Control Knob IS polntlng to a number In the cycle

MAKE SURE THE DRAIN HOSE IS HIGHER THAN THE WATER LEVEL IN THE WASHER. IF IT ISN’T...

l The washer may seem to be draining during wash and rinse cycles

l IWater can srphon out (See lnstallat+on Instructions ]

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Use& Care Guide Contents Loading your Washer Cleaning the lint FilterUnderstanding Your Washer Select a Cycle and Start the Washer Using Your WasherTo Adjust the Wash Water Temperature All rinses use cold waterTo Use Less Wash Water Load SizesDetergent Information For Spinning Only For a Pre WashFor Rinsing Only Set the Load Size SelectorPull OUT to Start Cycle OperationPush in KNOB, Turn to Cycle and Time CyclePage If Your Washer does not Spin Before calling for serviceIf Your Washer does not Fill If Washer Fills and Drains Without RunningCOOL-LINE’ Ldp@ Quality. Our way of life
Top Page Image Contents