Whirlpool LA38OOXK Loading your Washer, Understanding Your Washer, Cleaning the lint Filter

Page 3

loading your Washer

5.Add Diluted Fabric Softener Only to the Deep Rinse Cycle.

. DO NOT ADD FABRIC SOFTENER TO THE WASH Fabric softeners can com- bine with soap or detergent to make greasy stains on fabrics

For best washing results and energy savings. sort the laundry carefully

1. Sort the Laundry into Loads.

l Group the laundry into loads that can be washed and dried together. See the Laundry Guide for informa- tion and samples of typical loads.

l Try to mix large and small items for best movement in the washer.

2.Measure Detergent; Add to Washer Basket.

l See detergent information on page 6 and in Section IV of the Laundry Guide.

l Add dry bleach or water condi- tioner [not fabric softener] if used.

Follow the package directions carefully.

3.Dilute Liquid Bleach Before Add- ing to the Washer Basket.

l See the “Laundry Aids” section of the Laundry Guide for more information.

4.Load the Washer.

l Spread the load evenly. (Don’t put all the towels on one side and a few wash cloths on the other,) An unbal- anced load can cause the washer to shake during spinning.

l Load without packing so items can move freely for best cleaning and least wrinkling.

Understanding

Your Washer

This automatic washer has ?hree cyc es Each IS deslgned for a type cf load

You car‘ control the wash water

temperature and the amount that fills the *;ashe’ bc moving the Cycle Con+ro

knob according to nstructlons 31

page 4

Sections In this Use & Core SLj,s’e go into detail on +he ‘What and ‘tihy

of each setting Read this and the !ourizry Horde carefully to get the best cleaning results

Cleaning the lint Filter

/

Water runs through the lint filter whenever the washer agrtates Check It often to make sure it’s clean and filter- ing at Its best

To remove It for cleaning, bress tie release and pull straight out lnstruc

iIons for cleaning are printed on the bottom of the filter

Image 3
Contents Use& Care Guide Contents Cleaning the lint Filter Loading your WasherUnderstanding Your Washer All rinses use cold water Using Your WasherTo Adjust the Wash Water Temperature Select a Cycle and Start the WasherLoad Sizes To Use Less Wash WaterDetergent Information Set the Load Size Selector For a Pre WashFor Rinsing Only For Spinning OnlyCycle Cycle OperationPush in KNOB, Turn to Cycle and Time Pull OUT to StartPage If Washer Fills and Drains Without Running Before calling for serviceIf Your Washer does not Fill If Your Washer does not SpinCOOL-LINE’ Quality. Our way of life Ldp@