For a Pre Wash
Use this setting TV’ a shiorter SOAK CYCLE (no rinse‘ Jse enough
detergent for a sIngIt; .LJS~ 4dd the ioad
l Set the LOAD SIZE SELECTOR.
l Push the Cycle Con*rcl Knob In and turn it to the
SOAK CYCLE
“?. . . .j’L’ .
SOAh
l Pull the Control Knob out to start the washer
l The washer will fill, agitate for two mrnutes, soak for eight mrnutes, agi- tate for two more, and ‘hen drain and spin (See SOAK CYCLE description
on pagea )
l After filling, the washer may pause before starting to agitate.
For Rinsing Only
Loads with towels, diapers, jeans or heavrly soiled items often
need extra detergent Extra detergent can require an extra rinse
Your washer can be set to rinse only Use the settiny for an extra rrnse, or for laundry that orI\/ needs a rinse and spin
Cycle Control Knob, turn the pointer to one of those asterisks and pull the Control Knob out, the washer WIII fill, agrtate, drain and spin
The washer fills with cold water
Water level and temperature can’t be adjusted in this setting
For Spinning Only
There may be times when you wart to drain out all the wash water and start over. To stop the wasner at any time, just push in on the Cycle Cortrol Knob
To set the washer so it drains and spins water out of the load, push In on the Control Knob, turn to the right
(clockwise) so the pointer IS touching the bar just before OFF in any cycle
The washer WIII drain, spin out water and stop.
There IS an ‘asterlsk( ) just after the numbers in REGULAR HEAVY and SHORT cycles If vou push In on the