Winterizing
Because some water stays in the washer, freezing can cause a lot of damage. If your washer is stored or moved during the cold weather...
1. Shut off both water | 2. Puta quartof | |
faucets. Disconnect | automotivetype | |
and | drain water | antifreeze in the |
inlet | hoses. | basket. |
3.Set the washer for a DRAIN and SPIN (see page 8). Let it run for about 30 seconds to mix the antifreeze and water.
ON
To use the washer again...
1.Flush water pipes and hoses.
2.Connect hoses to the washer
4.Run the washer through a com- plete cycle with one cup of deter- gent to clean out the antifreeze.
3. Turn on the water faucets.