To Select a WASH
2. WATERTEMPERATURE
HOT WATER can be selected by turning the Control Knob to 12or 14 minutes in the REGULARHEAVY Cycle.
All rinses use cold water. This saves energy and helps prevent wrlnkles from seflfng info fabrics.
WARM WATER can be selected by turning the Control Knob to 8 or 10 minutes in the REGULARHEAVYCycle.
lA warm wash is preset in the SHORT Cycle. Just turn the Control Knob to the 4 or 6 minute setting in that cycle.
3. To Select a WATERLEVEL
HIGH WATER LEVEL. The washer will automatically fill to its highest level, (about 17.3galsY65.5 L),when the Control Knob points to a FILLarea.
NOTE: The washer will fill only when the knob points to a FILLarea.
LOWER WATER LEVELS. Setting the washer to fill with less water also sets it for a shorter wash time.
1.Push the Control Knob in and turn it clockwise to a FILLarea in the cycle you want.
2.Pull the Control Knob out; the washer will start to fill.
3.When the washer reaches the desired water level, push In the Control Knob and slowly turn it past the FILLarea. Pull ouf the Control Knob to start the washer.
For all rinses, the washer fills to Its highest level wtfh cold water.