Printing Maintenance
39
Knowing When to Replace Ink Tank
If an ink tank needs replacing, the POWER
POWERPOWER
POWER lamp will change from green to orange and
flash four times, as soon as printing begins. It is important to quickly identify the
empty tank using the BJ Status Monitor (Windows) or error messages (Macintosh) and
replace it.
The following message appears when an ink is empty. Printing will resume as soon as the
ink tank is replaced and the front cover is closed.
Note Should missing characters or white streaks appear despite
sufficient ink levels, refer to the section “When Printing Becomes
When Printing Becomes When Printing Becomes
When Printing Becomes
Faint or Colors are Incorrect
Faint or Colors are IncorrectFaint or Colors are Incorrect
Faint or Colors are Incorrect” on page 43.
Note When Low Ink is Detected
The BJ Status Monitor appears as soon as a print job starts. [!] indi-
cates a low ink level. Obtain a replacement tank as soon as possi-
ble.
The ink tank with [X] symbol is out of ink.
Replace with a new ink tank.
Press the RESUME/CANCEL
RESUME/CANCELRESUME/CANCEL
RESUME/CANCEL button to
resume printing with an empty ink tank.
When printing is finished, replace the ink
tank immediately. If you continue printing
with an empty ink tank, problems may
occur.
Menu screens will vary to some degree,
depending on your software environme nt.
Empty ink tank
Ink tank with low ink level
Click Cancel Printing
Cancel PrintingCancel Printing
Cancel Printing to cancel
the current print job.
i9900_QSG_US.book Page 39 Wednesday, January 7, 2004 6:09 PM