
HOW TO CONVERT JB-199 TO JB-199 CLIENT
6. Edit JBConfig.txt.
From
Check for the IP address of
WARNING: If IP address in
In
NOTE: If no such file exists, look for Config.txt.
8
Notepad program will open with JBConfig.txt file ready for editing.
In the text of JBConfig.txt, look for [System] section. In [System] section, append following 2 lines:
network=1 ; 0:off, 1:on(client only) ip=192.168.1.102 ; Server IP address
Substitute the IP address in the line with the IP address of
ip=192.168.0.105; Server IP address
After 2 lines are appended and new IP address is entered, JBConfig.txt should look as follows (contents and values may vary slightly):
[display] | ; 0:full, 1:window mode |
window=0 | |
videotype=0 | ; 0:full, 1:auto size |
screen=800,600,32 | ; defualt=800,600,32 |
FrameRate=75 | ; 75 frame/sec |
program=0 | ; 0:normal, 1:RG mode (support) |
; |
|
[system] | ; default : comm |
comm=1,115200,n,8,1 | |
comm2=2,115200,n,8,1 | ; serial remocon |
network=1 ; 0:off, 1:on(client only) ip=192.168.1.102 ; Server IP address*
;
[screen]
...
Press File button of Notepad program and select Save, and close the file.