Canon P-I9900-QSG-1203 quick start If the problem persists, perform print head deep cleaning

Printing Maintenance

(3) Select Ink Group to clean.

All colors:

Selecting both ink groups. Group 1:

Black (BCI-6BK), Red (BCI-6R), Green (BCI-6G), Photo Cyan (BCI-6PC), and Photo Magenta (BCI-6PM).

Group 2:

Cyan (BCI-6C), Magenta (BCI-6M), and Yellow (BCI-6Y).

(4) Click Execute.

Note The items to check before cleaning are

displayed by clicking Initial Check Items.

(5)When the confirmation message is displayed, click OK.

Important Do not perform any other operation until the print head cleaning finishes. This takes about one minute.

(6)Print the nozzle check pattern to check the print head condition. See “Printing the Nozzle Check Pattern” on page 50.

Notes ￿ If this does not solve the problem, clean the print heads again, up to three times.

￿After print head cleaning finishes, print the nozzle check pattern to verify that the print head nozzles are clean.

See “Printing the Nozzle Check Pattern” on page 44.

If the problem persists, perform print head deep cleaning.

See “Print Head Deep Cleaning” on page 52.

49