Operating instructions
Starting Your Washer
Be sure to measure and add detergent, then place a sorted load in the washer before starting it.
Select CYCLE and WASH TIME; 1. Start the Washer
Fill Area
A. Push In the Control Knob and
turn ii to the rlght. It must be pushed in and turned only clockwise.
B. Stop on a number in the cycle you want. The numbers are the minutes of wash time. The drawing shows 10minutes of agitation in the REG- ULARNORMAL Cycle. NOTE: The washer will fill only when the knob points to a FILLarea.
C. Start the washer by pulllng out the Control Knob. After filling, the washer will agitate for the selected number of minutes.
D. To stop the washer at any time push In the Control Knob. To restart the washer, pull out the Control Knob.
4