Selecting a wash temperature

	Your washer selects a wash water temperature
	and time when you select a wash cycle (see	Wuh watm tmpyture
	“Selecting a cycle and time” on page 7).	Wuh watm tmpyture
	“Selecting a cycle and time” on page 7).
	Match the wash water temperature to the type
	of fabric and soils being washed. All rinses are
	cold.
	For hot waeh water, turn the Cyde Control Knob
	to Heavy, 14 minutes wash time.
	For warm wash water, turn the Cycle Control
	Knob to Regular, 10 minutes wash time: or Short,
	6 minutes wash time.
	For cold wash water, turn the Cycle Control
	Knob to Normal, 6 minutes wash time; or Short, 2
	minutes wash time.
	You may select diierent wash times by first
	selecting the water temperature and then turning
	to the new wash time. For example, if you desire
	14 minutes wash time with cold water:
	1. Push in the Cycle Control Knob and turn it
	clockwise to Normal-6 (cold wash water).
	2. Pull out the Cycle Control Knob and allow your
	washer to fill.
	3. When your washer has filled, push in and turn
	the Cycle Control Knob clockwise to Heavy-14.
	(Your washer may add a small amount of
	additional warm water, but this should not
	affect the overall desired wash water tempera-
	ture.)
	4. Pull out the Cycle Control Knob.

Water temperature tips

-Use warm or hot wash water with permanent press fabrics.

-For heavily soiled permanent press or knit clothes, pre-wash or pre-soak in warm water before washing.

See the ‘Water usage guide’ on page 14 for more information.