Whirlpool W10112488 installation instructions Installation Requirements, Tools and Parts

Page 2

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. The parts supplied are in the washer basket.

Parts needed (not provided with washer):

Inlet hoses

Flat washers

To order:

Call the dealer from whom you purchased your washer.

Reference the toll-free number on the front page of the Washer User Instructions.

Visit the website on the front page of the Washer User Instructions.

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose installation or replacement dates for future reference.

Parts supplied:

ABC

A. Beaded tie strap

B. Front leveling feet with nuts (2)

C. Drain hose form

Tools needed for installation:

Adjustable or open end

Ruler or measuring tape

 

wrench ⁹⁄₁₆" (14 mm)

Pliers that open to 1⁹⁄₁₆"

 

Level

 

(3.95 cm)

Wood block

Flashlight (optional)

Alternate Parts

Your installation may require additional parts. For information on ordering, please refer to the toll-free phone numbers on the front page of the Washer User Instructions.

If You Have:

You Will Need to Buy:

 

 

Laundry tub or

Sump pump system (if not already

standpipe taller

available)

than 96" (2.4 m)

 

 

 

1" (2.5 cm)

1¹⁄₄" (3.2 cm) diameter to 1" (2.5 cm)

diameter

diameter standpipe adapter,

standpipe

Part Number 280130

 

 

Overhead sewer

Standard 20 gal. (76 L) 39" (99 cm) tall

 

drain tub or utility sink, sump pump and

 

connectors (available from local

 

plumbing suppliers)

 

 

Floor drain

Siphon break kit, Part Number 280129;

 

additional drain hose,

 

Part Number 3357090

 

 

Water faucets

2 longer water fill hoses:

beyond reach of fill

6 ft (1.8 m) Part Number 76314,

hoses

10 ft (3.0 m) Part Number 350008

 

 

Drain hose too

Kit Part Number 280131

short

 

 

 

Lint clogged drain

Drain protector, Part Number 367031

 

 

2

Image 2
Contents Washer Installation Instructions Washer SafetyInstallation Requirements Tools and PartsYou will need Location RequirementsDrain System Before You Start Installation InstructionsElectrical Requirements Looped power cord To remove the power cord from the cord restraint, pushStraight power cord Connect the Inlet Hoses Connecting the drain hose form to the corrugated drain hoseConnect Drain Hose To keep drain water from going back into the washerLevel the Washer Install the Front Leveling FeetSecure the Drain Hose Check for leaksSlide the washer to its final location Complete InstallationSteps in Final Location Herramientas y piezas Seguridad DE LA LavadoraRequisitos DE Instalación Piezas necesarias no están provistas con la lavadoraPiezas alternativas Requisitos de ubicaciónSistema de desagüe Usted necesitaráSistema de desagüe en el piso vista D Requisitos eléctricosSistema de desagüe en un lavadero vista C Se requiere una fuente de alimentación eléctrica deCómo quitar el material de transporte Instrucciones DE InstalaciónAntes de empezar Cable de suministro de energía derechoCómo evitar que el agua del desagüe regrese a la lavadora Cómo conectar la manguera de desagüeConecte las mangueras de entrada Revise si hay pérdidas de agua Asegure la manguera de desagüeLimpie las tuberías del agua Conecte las mangueras de entrada a la lavadoraPasos en la ubicación final Nivele la lavadoraInstale las patas niveladoras delanteras Deslice la lavadora hasta su ubicación finalSécurité DE LA Laveuse Complete la instalaciónExigences D’INSTALLATION Outillage et piècesIl vous faudra Exigences d’emplacementSystème de vidange Avant de commencer Instructions D’INSTALLATIONSpécifications électriques Retrait du matériel dexpéditionLe sortir Pour retirer le cordon dalimentation du dispositifCordon d’alimentation droit Cordon d’alimentation en bouclePour empêcher l’eau de vidange de refluer dans la laveuse Raccordement du tuyau de vidangeRaccordement des tuyaux d’arrivée d’eau Purger les canalisations d’eauRaccorder les tuyaux d’arrivée d’eau à la laveuse Immobilisation du tuyau de vidangeInspection-recherche des fuites Réglage de l’aplomb de la laveuse Achever l’installation W10112488

W10112488 specifications

The Whirlpool W10112488 is a highly efficient and versatile appliance that has carved a niche for itself in the competitive world of kitchen gadgets. Designed primarily as a water filter, it boasts an impressive array of features and technologies, making it an essential addition to any home seeking cleaner and better-tasting drinking water.

One of the standout features of the W10112488 is its advanced filtration system. It utilizes a multi-stage filtration process to remove contaminants and impurities commonly found in tap water, such as chlorine, sediment, and rust. This ensures that the water you drink is not only safe but also tastes great. The filter has been certified to reduce harmful substances, giving owners peace of mind regarding their family's health and well-being.

The design of the W10112488 is another notable aspect. It is compact and lightweight, making it easy to install and replace on various refrigerator models. Its compatibility with multiple Whirlpool refrigerator models adds to its appeal, allowing users to enhance their existing appliances without hassle. Moreover, installation typically does not require any specialized tools, further simplifying the process for consumers.

In terms of longevity, the W10112488 filter has a significant lifespan. Depending on usage, it can last up to six months before needing replacement. This extended usage period not only ensures that users get optimal performance but also makes it a cost-effective solution for families concerned about ongoing expenses related to water filtration.

The filter's performance is also backed by innovative technologies. Whirlpool has engineered it to use a high-capacity design that maximizes the filter's effectiveness while maintaining a steady flow of water. This means users won't have to sacrifice convenience for quality. Whether it’s for brewing coffee, cooking, or direct consumption, the W10112488 delivers filtered water effortlessly.

Finally, eco-conscious consumers will appreciate Whirlpool's commitment to sustainability. By using this filter, households can reduce their reliance on bottled water, thus contributing to a significant reduction in plastic waste and benefiting the environment.

In summary, the Whirlpool W10112488 water filter combines advanced filtration technology, user-friendly design, longevity, and eco-friendliness, making it a smart choice for anyone looking to improve their home's water quality. With its features and efficiency, it stands as a testament to Whirlpool's dedication to consumer satisfaction and environmental responsibility.