|
|
| What to do if... |
|
|
|
|
Crockery and cutlery... |
| Possible causes... | Solutions... |
...salt indicator lit | - | Use tablets for soft water. | - Set “Tablet” option; if this option is not available, it is normal for the salt indicator to light up. |
...have deposits: regeneration salt residue | - | Water too hard. | - In areas with very hard water, more regeneration salt needs to be added (see page 2, “How to set water |
|
|
| hardness”). |
|
|
|
|
| - | Salt reservoir cap open. | - Close the salt reservoir cap properly. |
|
|
|
|
| - | Not enough rinse aid. | - If you use a combined action detergent, try adding more rinse aid. |
|
|
|
|
...are not dry | - | Plastic containers dry badly. | - Synthetic materials do not dry well; if wet at end of cycle, wipe dry. |
| - | Clean dishes left in dishwasher for a long time after end | - In this situation, the presence of drops of water on dishes and on the sides of the dishwasher is normal. |
|
| of cycle (e.g. when using “Delayed start” option). | Try releasing the door 5 minutes before removing the dishes. |
| - | Incorrect arrangement of the concave items in the rack. | - Arrange crockery so that water does not collect in cavities. |
| - | Incorrect dosage the rinse aid. | - Increase the dosage of rinse aid (see page 3, “Adding rinse aid”). |
| - | Rapid programme selected. | - The rapid programme is intended for quickly washing lightly soiled dishes. If used for a full load of medium/ |
|
|
| heavy soiled dishes, the dishes may not dry completely. If so, select a |
|
|
| results, open the door after the end of the programme and wait 15 minutes before unloading the dishwasher. |
...have discoloured plastic parts | - | Tomato/Carrot juice. | - Tomato sauce, for example, can lead to discolouring of plastic parts. Powder detergent is recommended as |
|
|
| it allows slightly higher doses to be used for improved whitening. Programmes with higher wash |
|
|
| temperatures should be used. |
|
|
|
|
...opaque glasses, etc. | - | Dishes unsuitable for washing in dishwashers (porcelain), | - Only use |
...removable deposits on glasses | - | Usage of incorrect programmes for glasses. | - Dishes should be put together, to avoid touching each other. Do not put glassware together in baskets. |
|
|
| Use suitable programme for glass. |
|
|
|
|
...glasses not sparkling | - | Not conform of glasses to washing in dishwashers | - Some kinds of glass cannot be washed in the dishwasher. |
|
| (porcelain). | |
|
|
| |
|
|
|
|
...permanent deposits on glasses | - | Rainbow effect. | - This phenomenon is irreversible. We recommend in future: |
|
|
| - Change the control of system of dosage of softener. |
|
|
| - Be careful – follow recommended detergent dosage. |
|
|
| - For combined action tablets see detergent producer’s recommendations. |
...tea cups darken and dirt does not | - | Not known. | - This phenomenon is inevitable. Theine alters colours permanently. |
disappear after washing in dishwasher |
|
| |
|
|
| |
...rust marks | - |
| - Salty or acidic food residues can cause rust marks even on stainless steel cutlery. To avoid this, always use |
|
|
| the |
...other marks | - | Rinse aid dosage too low. | - In the presence of marks, increase the rinse aid dosage (see page 3, “Adding rinse aid”). |
|
|
| - If you use a combined action detergent, possibly add more rinse aid. |
|
|
|
|
...streaks | - | Rinse aid dosage too high. | - In the presence of streaks, reduce the rinse aid dosage (see page 3, “Adding rinse aid”). |
|
|
| - If you use a combined action detergent try adding more rinse aid. |
...suds | - | Unsuitable dosage of detergent/rinse aid. | - Only use the amount of detergent/rinse aid required, since excessive amounts can lead to excess suds. |
|
|
|
|
GB