Adding Detergent and Additives, Door Lock

ENERGY AND WATER CONSUMPTION DATA

	Programme	Temperature			Load		Water			Energy	Programme
												time

			(°C)		(kg)			(l)		(kWh)		(min)
	Cotton	90		5.0		72			1.80		115

	Cotton	60		5.0		72			1.15		115

	Coloured	60		2.0		66			0.80		100

	Coloured	40		2.0		66			0.40		100

Quick Wash + 1/2 Load		40		2.5		57			0.55		85

Synthetics + 1/2 Load		30		1.0		55			0.30		70

	Delicate	40		1.5		70			0.65		55

	Wool	40		1.0		70			0.55		45

Programmes with prewash last about 15 minutes more than programmes without prewash. Water and energy consumption values were measured in standard conditions in compliance with the Standard IEC 60 456. Individual consumption may vary in comparison with the values specified in the table, because of differences in supply water pressure and temperature, the load and the type of wash.

ADDING DETERGENT AND ADDITIVES

Pour the detergent and additives into the respective compartments as follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and starch

• Bleach

• Stain removers

• Anti-scale agents (water hardness 4)

Important Note:

•Do not fill beyond the “MAX” level mark.

•For programme with prewash: do not use liquid detergent.

•For programmes without prewash from cold to 40° C, it is recommended to use a liquid detergent to avoid whitish residues on the coloured laundry.

CLOSE THE DOOR AND SELECT THE PROGRAMME

1.Turn the programme selector knob clockwise to the desired programme.

2.Turn the temperature knob to the required temperature.

SELECT ANY DESIRED OPTION

“Half Load” button

•Reduces the water consumption in the “Cotton” and “Synthetics” programmes especially during the rinse.

•Especially suitable for lightly soiled or small loads (reduces the quantity of detergent).

•Not suitable for high temperature programmes.

“No Spin”

•It excludes the spin function from the programme.

PROGRAMME START

Open the water inlet tap and select the desidered spin speed, turning the spin speed and On/ Off knob to the desidered position (the indicated spin speed or “No Spin”) .The pilot lamp lights up.

DOOR LOCK

During the running programme, the door cannot be opened. The door locks automatically in all programmes.

If the programme is stopped or if an electrical power failure occurs, the door unlocks automatically after about 1 minute.

PROGRAMME END

•The programme selector knob is at “STOP”.

1.Turn the spin speed knob to the Off position “”. The pilot light goes out.

2.Cancel the options by pressing the appropriate buttons.

3.Turn the water supply tap off.

4.Wait for the door to unlock (about 1 minute).

5.Open the door and the drum flaps and unload the machine.

SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER PROGRAMME START

1.Turn the spin speed knob to the Off position “” to switch off the appliance. The pilot light goes out.

2.Select the new programme, temperature and options.

3.Turn the spin speed knob to the desidered spin speed to switch on the appliance. The pilot light lights.

TO STOP, RESET A PROGRAMME BEFORE THE END

1.Turn the spin speed knob to the Off position “” to switch off the appliance. The pilot light goes out.

2.Set the programme selector on “Drain”.

3.Turn the spin speed knob to the desidered spin speed to start the “Drain” programme. Only open the door when the programme selector is at “STOP” and

the door is unlocked (after approximately 1 minute).

5019 100 01026

AWT 2050, AWT 2040 specifications

The Whirlpool AWT 2040 and AWT 2050 are top-loading washing machines designed to provide efficient and effective cleaning for families and individuals alike. With an array of features and cutting-edge technologies, these models set a standard for performance, convenience, and reliability in the laundry room.

One of the most notable features of both models is their robust wash programs, which offer a selection of cycles tailored to various fabric types and soil levels. The AWT 2040 and AWT 2050 allow users to choose from multiple wash settings, ensuring optimal cleaning results while preserving the integrity of clothing items. Advanced sensors and technology determine the best cycle based on the load and fabric type, offering a customized washing experience.

Both machines are equipped with a powerful motor that ensures efficient washing and spin-drying. The robust motor works in conjunction with a dynamic drum design to enhance the washing action, providing thorough cleaning even for heavily soiled garments. The unique agitation mechanism promotes thorough cleaning while being gentle on fabrics, reducing wear and tear.

Energy efficiency is another strong suit for the AWT 2040 and AWT 2050. These models are designed to minimize water and energy consumption without compromising performance. With their high energy ratings, they make an eco-friendly choice, helping households save on utility bills while also being environmentally conscious.

User-friendly controls and a sturdy design make both the AWT 2040 and AWT 2050 easy to operate. The intuitive interface allows users to select wash cycles, adjust settings, and monitor progress effortlessly. The machines also feature a large capacity drum, making them suitable for handling larger loads, which is ideal for families or those with frequent laundry needs.

In addition, the machines come with a range of safety features, including child lock options and an unbalanced load detection system, which prevents excessive vibration and potential damage during operation. These characteristics enhance the overall reliability and usability of the AWT 2040 and AWT 2050.

Whirlpool's commitment to quality and innovation is evident in both washing machines. Overall, the AWT 2040 and AWT 2050 combine advanced technology, user-friendly features, and excellent energy efficiency to deliver a laundry solution that meets the diverse needs of modern households. These machines not only make laundry tasks easier but also ensure that clothes remain fresh and well-cared for with every wash.