Checking Your Vent

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer/dryer, follow basic precautions, including the following:

■Read all instructions before using the washer/dryer.

■Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.

■Do not wash or dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, other flammable, or explosive substances as they give off vapors that could ignite or explode.

■Do not add gasoline, dry-cleaning solvents, or other flammable, or explosive substances to the wash water. These substances give off vapors that could ignite or explode.

■Do not allow children to play on or in the washer/dryer. Close supervision of children is necessary when the washer/dryer is used near children.

■Before the washer/dryer is removed from service or discarded, remove the doors to the washer/dryer compartments.

■Do not reach into the washer/dryer if the tub, agitator or drum is moving.

■Do not install or store the washer/dryer where it will be exposed to the weather.

■Do not tamper with controls.

■Clean dryer lint screen before or after each load.

■Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washing machine, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.

■Do not repair or replace any part of the washer/dryer or attempt any servicing unless specifically recommended in this Use and Care Guide or in published user-repair instructions that you understand and have the skills to carry out.

■Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.

■Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.

■Keep area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt.

■The interior of the machine and dryer exhaust vent should be cleaned periodically by qualified service personnel.

■See “Electrical Requirements” section for grounding instructions.

SAVE THESE INSTRUCTIONS

Your dryer must be properly installed and vented to achieve maximum drying efficiency and shorten drying times. Use the minimum recommended installation clearances (found in your Installation Instructions) to avoid blocking the flow of combustion and ventilation air. See the Installation Instructions for more information.

WARNING

Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent.

Failure to follow these instructions can result in death or fire.

If the dryer is not properly installed and vented, it will not be covered under the warranty.

NOTE: Service calls caused by improper venting will be paid for by the customer, whether it was a paid installation or self- installed.

1.Do not use plastic vent or metal foil vent. Use 4 in. (10.2 cm) metal or flexible metal vent. Do not kink or crush flexible metal vent. It must be completely extended to allow adequate exhaust air to flow. Check vent after installation. Refer to your Installation Instructions for proper length requirements of vent.

2.Use a 4 in. (10.2 cm) exhaust hood.

3.Use the straightest path possible when routing the vent.

4.Use clamps to seal all joints. Do not use duct tape, screws or other fastening devices that extend into the interior of the vent to secure vent.

5.Clean exhaust vent periodically, depending on use, but at least every 2 years, or when installing your dryer in a new location. When cleaning is complete, be sure to follow the Installation Instructions supplied with your dryer for final product check.

3406881 specifications

The Whirlpool 3406881 is a versatile appliance known for its reliability and innovative features, making it a popular choice among homeowners in need of an efficient refrigerator. This model is designed with user convenience and practicality in mind, catering to various storage needs and kitchen layouts.

One of the standout characteristics of the Whirlpool 3406881 is its spacious interior. With a well-organized layout, it offers ample space for both fresh and frozen goods. The adjustable shelves allow users to customize the refrigerator’s interior to accommodate a variety of items, from large containers to delicate produce. Additionally, the spacious freezer compartment is designed for easy access, featuring slide-out shelves that make item retrieval effortless.

The refrigerator is equipped with advanced cooling technology that ensures consistent temperature control, preserving the freshness of food items for longer periods. This is particularly important for consumers looking to minimize food waste and maintain optimal food quality. The energy-efficient design of the Whirlpool 3406881 also contributes to lower electricity bills, making it an eco-friendly option without compromising performance.

Another notable feature is the water and ice dispenser located on the door, which provides easy access to chilled water and ice cubes. This is especially beneficial for families and individuals who enjoy having a refreshing drink on hand. The dispenser is designed for convenience, allowing for easy one-handed operation.

The Whirlpool 3406881 also incorporates various smart technologies that enhance its usability. Some models may come with features like temperature management systems and diagnostic tools that provide users with alerts and insights about the appliance’s performance. These technologies help ensure that the refrigerator operates at peak efficiency while empowering users with information about maintenance needs.

In terms of aesthetic appeal, the Whirlpool 3406881 is available in a variety of finishes, allowing it to seamlessly blend with different kitchen styles. Its modern design adds a touch of elegance to any space, making it not only a functional appliance but also a stylish addition to the home.

Overall, the Whirlpool 3406881 stands out for its spaciousness, advanced cooling technologies, energy efficiency, and user-friendly features. This combination of attributes makes it an excellent choice for those seeking a dependable and functional refrigerator that meets the demands of modern living.