Whirlpool 3406881 Washer Troubleshooting, Washer and Components, Washer won’t drain or spin

Page 8

WASHER TROUBLESHOOTING

First try the solutions suggested here and possibly avoid the cost of a service call...

Washer and Components

Washer Operation

Noisy

■Is the load balanced and the washer/dryer level? The wash load should be balanced and not overloaded. The washer/ dryer must be level. The front feet should be properly installed and the nuts tightened. Reset the rear leveling legs (if needed). See the Installation Instructions.

■Did you completely remove the yellow shipping strap with cotter pins? See the Installation Instructions.

■Are the gears engaging after the drain and before spin, or is the upper part of agitator clicking during the wash cycle? These are normal washer noises.

Leaking

■Check the following: Are the fill hoses tight?

Are the fill hose washers properly seated?

Is the drain hose clamp properly installed? See the Installation Instructions.

■Is the sink or drain clogged? Sink and standpipe must be able to handle 17 gal. (64 L) of water per minute.

■Is water deflecting off the tub ring or the load? Center the tub before starting the washer. The wash load should be balanced and not overloaded. The fill or spray rinses can deflect off the load. The washer/dryer must be level. Ensure that the leveling legs are properly installed. See the Installation Instructions.

■Check household plumbing for leaks.

Basket crooked

■Was the washer basket pulled forward during loading? Push the basket to the center before starting wash.

■Is the load balanced and the washer/dryer level? The wash load should be balanced and not overloaded. The washer/ dryer must be level. Ensure that the leveling legs are properly installed. See the Installation Instructions.

■The washer basket moves while washing. This is normal.

Agitator operation

■The top of the agitator is loose, or moves in only one direction. This is normal.

Dispenser clogged (on some models)

■Did you follow the manufacturer’s directions when adding fabric softener to the dispenser (on some models)? Measure fabric softener and carefully pour into the dispenser. Wipe up all spills. Dilute fabric softener in the fabric softener dispenser.

Washer stops, won’t fill, rinse or agitate

■Check the following:

Is the power cord plugged into a grounded 3 prong outlet?

Is the indicator on the Cycle Control knob properly lined up with a cycle? Turn the Cycle Control knob to the right slightly and pull to start.

Are the water inlet valve screens clogged?

Are both the hot and cold water faucets turned on? Is the water inlet hose kinked?

■Does the water level seem too low, or does the washer appear to not fill completely? The top of the agitator is much higher than the highest water level. This is normal and necessary for clothes to move freely.

■Is there power at the plug? Check your electrical source or call an electrician.

■Has a fuse blown or is the circuit breaker open? If problem continues, call an electrician.

■Are you using an extension cord? Do not use an extension cord.

■Is the washer in a normal pause in the cycle? The washer pauses for about 2 minutes during certain cycles. Allow the cycle to continue. Some cycles feature periods of agitation and soak.

■Is the washer overloaded? Wash smaller loads.

■Is the lid open? The lid must be closed during operation. Washer will not agitate or spin with the lid open.

Washer won’t drain or spin

■Is the drain hose clogged, or the end of the drain hose more than 96 in. (244 cm) above the floor? See the Installation Instructions for proper installation of drain hose.

■Is the lid open? The lid must be closed during operation. Washer will not agitate or spin with the lid open.

■Is there excessive sudsing? Always measure detergent. Follow manufacturer’s directions. If you have very soft water, you may need to use less detergent.

■Is your voltage low? Check your electrical source or call an electrician. Do not use an extension cord.

Washer continues to fill or drain, cycle seems stuck

■Is the top of drain hose lower than the water level in washer? The top of the hose must be higher than the water level in the washer for proper operation. See the Installation Instructions.

■Does the drain hose fit too tightly in the standpipe, or is it taped to the standpipe? The drain hose should be loose yet fit securely. Do not seal the drain hose with tape. The hose needs an air gap. See the Installation Instructions.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Table of Contents / Table des matières WASHER/DRYER Safety Your safety and the safety of others are very importantImportant Safety Instructions Checking Your VentWasher USE LoadingStarting Your Washer Large Capacity WashersDryer USE Optional Add liquid fabric softenerTo stop or restart your washer Large Capacity DryerCleaning Your Washer Cleaning the Dryer LocationWASHER/DRYER Care Starting Your DryerCleaning the Lint Screen Cleaning the Dryer InteriorRemoving Accumulated Lint Moving & StorageWasher won’t drain or spin Washer TroubleshootingWasher and Components Stains on load Washer ResultsResidue or lint on load Dryer Results Dryer TroubleshootingDryer Operation Whirlpool WASHER/DRYER Warranty ONE-YEAR Full WarrantySecond Through TENTH-YEAR Limited Warranty on Outer TUB To locate FSP replacement parts in your areaInstructions Pour L’UTILISATEUR DE LA LAVEUSE/SÉCHEUSE Sécurité DE LA LAVEUSE/SÉCHEUSEQUE Faire Dans LE CAS D’UNE Odeur DE GAZ Utilisation DE LA Laveuse Vérification du conduit d’évacuationChargement Laveuse DE Grande CapacitéMise en marche de la laveuse Facultatif Ajouter l’eau de JavelUtilisation DE LA Sécheuse Mise en marche de la sécheuseArrêt et remise en marche de la laveuse Sécheuse DE Grande CapacitéNettoyage de l’emplacement de la sécheuse Entretien DE LA LAVEUSE/SÉCHEUSENettoyage de votre laveuse Robinets darrivée deauRangement et déménagement Nettoyage de l’intérieur de la sécheuseEnlever la charpie accumulée Dépannage Laveuse La laveuse et ses composantsFonctionnement de la laveuse La laveuse fait du bruitRésultats de lavage Dépannage Sécheuse Fonctionnement de la sécheuseRésultats de la sécheuse Sécheuse en panne Vérifier ce qui suitVêtements La charge a-t-elle été surséchée? Vérifier l’étiquetteGarantie Complète DE UN AN Whirlpool Corporation ne paiera pas pourPour localiser des pièces de rechange FSP dans votre région Téléphoner au Centre d’interaction avec la clientèle au3406881 Whirlpool Corporation All rights reserved

3406881 specifications

The Whirlpool 3406881 is a versatile appliance known for its reliability and innovative features, making it a popular choice among homeowners in need of an efficient refrigerator. This model is designed with user convenience and practicality in mind, catering to various storage needs and kitchen layouts.

One of the standout characteristics of the Whirlpool 3406881 is its spacious interior. With a well-organized layout, it offers ample space for both fresh and frozen goods. The adjustable shelves allow users to customize the refrigerator’s interior to accommodate a variety of items, from large containers to delicate produce. Additionally, the spacious freezer compartment is designed for easy access, featuring slide-out shelves that make item retrieval effortless.

The refrigerator is equipped with advanced cooling technology that ensures consistent temperature control, preserving the freshness of food items for longer periods. This is particularly important for consumers looking to minimize food waste and maintain optimal food quality. The energy-efficient design of the Whirlpool 3406881 also contributes to lower electricity bills, making it an eco-friendly option without compromising performance.

Another notable feature is the water and ice dispenser located on the door, which provides easy access to chilled water and ice cubes. This is especially beneficial for families and individuals who enjoy having a refreshing drink on hand. The dispenser is designed for convenience, allowing for easy one-handed operation.

The Whirlpool 3406881 also incorporates various smart technologies that enhance its usability. Some models may come with features like temperature management systems and diagnostic tools that provide users with alerts and insights about the appliance’s performance. These technologies help ensure that the refrigerator operates at peak efficiency while empowering users with information about maintenance needs.

In terms of aesthetic appeal, the Whirlpool 3406881 is available in a variety of finishes, allowing it to seamlessly blend with different kitchen styles. Its modern design adds a touch of elegance to any space, making it not only a functional appliance but also a stylish addition to the home.

Overall, the Whirlpool 3406881 stands out for its spaciousness, advanced cooling technologies, energy efficiency, and user-friendly features. This combination of attributes makes it an excellent choice for those seeking a dependable and functional refrigerator that meets the demands of modern living.
Top Page Image Contents