Owner options coin- operated models | Whirlpool 3360620 instruction

Owner options (coin- operated models)

CAUTION: Disconnect power cord.

1.For EXTRA SPIN and/or EXTRA WASH.

•Remove meter case service door

•Loosen (2) screws on the timer mounting bracket and lift the timer out.

(2) screws

a. EXTRA WASH — 3 minutes.

• Connect LBU to LBU2.

Typical full load sizes.

Load Type	Loading Suggestion	Load Type	Loading Suggestion

Mixed	3 double sheets	Heavy	3 pair pants
Load	4 pillowcases	work	3 shirts
	8 T-shirts	clothes	1 coverall
	6 pair shorts		4 pair jeans
	2 shirts		1 overall
	2 blouses
	8 handkerchiefs
Permanent	2 double or	Knits	3 blouses
Press	1 king size sheet		4 slacks
	1 tablecloth		6 shirts
	1 dress		4 tops
	1 blouse		4 dresses
	2 slacks
	3 shirts
	2 pillowcases

• Disconnect GY from GY2.

• Set timer clutch arm as shown

below.

Extra Wash

Standard Wash

Leave “⊥” on timer shaft aligned with “⊥” on timer and move timer clutch arm to “extra” wash position.

b. EXTRA SPIN — 2 minutes.

•Connect BK to BK2

2.For WARM RINSE and WATER SAVER:

•Remove screws from each end of the console bottom.

•Pull the console bottom forward; lift and tilt it back.

a.WARM RINSE

•Connect J1 to J2

b.SAVE WATER

•Pull out tab on water-level switch.

3.If use of a larger coin vault, lock and key is desired, conversion bar in lower portion of coin vault area can be removed.

4.If additional security is needed, top and cabinet can be locked to washer back panel by using a “screw type” lock and key in space provided in top panel under console. The “screw type” lock and key are available from usual industry sources.

PAGE 6

Check list for washer operation.

Check the following if the washer is not operating properly:

1.Power supply cord is plugged in.

2.Circuit breaker is not tripped or house fuse blown.

3.Timer has been advanced to start of a cycle.

4.Water faucets are turned on.

5.Inlet and drain hoses are not kinked.

6.Washer lid is closed.

7.Inlet valve is frozen if not protected from the weather.

8.Suds level. Excess suds will slow the spin and cause poor rinsing. Operate the washer through a complete cycle with no detergent. Use less detergent or a controlled suds type detergent in future loads.

Operating Tips.

WARNING

Explosion Hazard

Never place items in the washer that are dampened with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on it (including cooking oils).

Doing so can result in death, explosion, or fire.

It is recommended that fiberglass items not be washed in coin-operated washers. If these items are washed in the washer, run the washer through a complete cycle to rinse any residue away that might be left in the washer.

Moving the washer to

a new location...

Wedge blanket between tub ring and cabinet top.

Remove front legs.

Tape rear	Tape 2
legs in “up”	Tape 2
position.	sides.
position.

Note: Do Not place blanket in this area (switch).

•Remove the front legs from the base of the washer.

•Place both rear leveling legs in the upper position and tape securely.

•Apply tape to the side and bottom of the cabinet near the rear.

•Open washer lid, wedge a blanket between the tub ring and the cabinet top restricting the tub movement.

•Handle washer carefully. Do Not drop washer while using hand truck.

3360620 specifications

The Whirlpool 3360620 is an essential component for those looking to enhance the functionality of their kitchen appliances, specifically designed for certain models of Whirlpool refrigerators. This replacement part primarily serves as a door shelf bin, catering to the storage needs of users by providing additional space and organization for condiments, beverages, and small food items.

One of the standout features of the Whirlpool 3360620 is its robust construction. Made from high-quality plastic, it is designed to withstand the rigors of daily use while maintaining its structural integrity over time. This durability ensures that it won’t easily warp or crack, providing long-lasting service in the often humid environment of a refrigerator.

The design of the 3360620 is also noteworthy. It features a clear, see-through appearance, allowing users to quickly identify contents without needing to remove the bin. This transparency enhances organization and efficiency, making it easier to find what you need at a glance. Measuring approximately 13 x 6 inches, it fits perfectly within the door of compatible Whirlpool models, maximizing space and usability.

Another significant characteristic of this replacement part is its ease of installation. Designed as a direct fit for specific Whirlpool refrigerator models, it can be installed without the need for special tools, making it accessible for most users to replace on their own. This feature is particularly important for those who prefer DIY repairs and maintenance.

In terms of compatibility, the Whirlpool 3360620 fits several refrigerator models, and it’s always recommended to check the appliance’s model number to ensure a proper fit. This versatility makes it a popular choice among Whirlpool users who seek to prolong the lifespan of their appliances while maintaining organized storage solutions.

Overall, the Whirlpool 3360620 door shelf bin combines durability, efficient design, and easy installation, making it a valuable addition to any Whirlpool refrigerator. It helps users keep their kitchen organized and maximizes the available space, reflecting Whirlpool’s commitment to quality and customer satisfaction.