JVC XM-EX90 manual To correct input characters, To cancel all input characters

Page 40

Deutsch

6 Press 0 to eject the MD.

INPUT	The data in the memory is written in the MD before it is
	ejected.
	The display shows “UTOC writing” during MD write
	operation.
	•	Be careful not to apply impact to the MD recorder
		during writing data in the memory in the MD.
		Otherwise the recording may be unplayable later.
	•	The data in the memory is written in the MD also
		when the power is switched to the STANDBY mode
		while “EDITING” is being displayed.

To correct input characters:

CANCEL

Characters can be corrected only before ENTER is pressed.

1Press </4 or ¢/> to move the cursor to the character to be corrected.

2Press CANCEL to erase the character.

3Input the correct character.

Français

To cancel all input characters:

Characters can be cleared only before ENTER is pressed.

Press CANCEL to erase all characters then press TITLE.

To exit editing:

Press TITLE before pressing ENTER.

40 XM-EX90

Image 40

Contents XM-EX90 Important for Laser Products Important cautions WelcomeFor safe use, observe the following Table of Contents Parts Index Front panelDisplay Analog input/output jacks Rear panelDigital in jacks Remote control unit Normal control button panelNumeric keys MD Control buttonsMD editing control buttons Character input keyboardSetting Up the System Supplied AccesoriesAmplifier/Tuner Audio pin cordsCD player Optical digital cableRemote control batteries Open the battery caseClose the battery case Load the batteriesRemote control operation Playback MD playback Basic operationLoad an MD Mini Disc Press Ü/8To let playback pause temporarily To skip to the beginning of a trackFast forward/fast reverse To select and play a desired trackSwitching the displayed information When a track has already been selectedPress Repeat to select the repeat play mode To cancel repeat playbackRepeat playback Press £Press Play Mode to select Program Select desired track numbers using Numeric keysProgram playback Load an MDTo cancel programmed tracks To exit program play modeTo check the programmed tracks and their order If you make a mistake in programmingPress Play Mode to select Random To exit random play modeRandom playback To repeat random playbackRecording MD recording Basic operationLoad a recordable MD Mini Disc Press REC Pause Select the input by pressing InputTo adjust the analog input level To stop recordingTo let recording pause temporarily To display the remaining recording timeAutomatic track marking Track markingManual track marking CD recording Load a recordable MD Mini Disc Prepare the CD playerPress CD REC Synchronized recording of the analog inputPress 4 or ¢ to adjust the input level Radio or tape recordingPress Input to select the analog input With the cassette deck, press Û or ÜEditing Functions MD editing functionsDividing a track Divide Erasing a track EraseCombining editing functions Assigning titlesDividing a track Divide Press Edit to select DividePress SET Play the track to be dividedFine-adjust the track marking position by Pressing /4 or ¢ To restore the original track from the divided tracksPress Enter Press 0 to eject the MDPress Edit to select Join Joining tracks JoinSelect the track to be joined with the previous Track Decrements by Press Edit to select Move Moving a track MoveSelect the track number to be moved, then Deutsch Press Edit to select Erase Erasing a track EraseSelect the track number to be erased, then Memory. The display shows Editing Erasing all tracks in an MD ALL Erase Press Edit to select ALL EraseData in the memory is written in the MD before it is Assigning titles to an MD and its tracks Load a recorded MD Mini DiscPress Title Cursor starts blinkingInput the title To cancel all input characters To correct input charactersAfter start of playback or recording of a track Assigning titles while playback or recordingInput the track title Français Deutsch Remote controlling the amplifier/tuner Switching the Power button’s control modeAmplifier/tuner mode MD recorder modeRemote controlling the amplifier/tuner Amplifier/tuner control buttonsNumeric keys 1 to 10, +10 +/R, -/LRemote controlling the CD player and cassette deck CD player control buttonsSelect a track number using the numeric keys 8 9 Operation ExamplesProgram other tracks by repeating steps 3 Press £ Play the source to be recorded Press ª or £Compu Link Single remote control unit Timer operationShortcut playback Synchronized recordingRule on Digital Copying Scms Serial Copy Management SystemAbout MD Mini Disc Role of the cartridgeTwo disc types Playback-only MDAtrac Adaptive TRansform Acoustic Coding Utoc User Table Of ContentsSound skip guard memory MD Error Messages Error Messages Description TreatmentSymptom Cause MD RestrictionsInstallation location Periodical maintenanceHandling MDs To maintain high quality audio for a long periodSymptom Cause Treatment TroubleshootingAdditional Information Specifications DigitalHOW to Locate Your JVC Service Center Limited Warranty AUDIO-1 JVC 0598TTMWSTOZK