JVC XM-EX90 manual Fine-adjust the track marking position by Pressing /4 or ¢, Press Enter

Page 29

ENTER

INPUT

5Fine-adjust the track marking position by

pressing </4 or ¢/>.

The track marking position can be fine-adjusted in the range of ±128 positions (approx. ±8 sec.).

As you press the button, the track marking displaces slightly and the 3-second section from the newly divided point will be played repeatedly.

• After completing the fine-adjustment, go to step 6.

To correct a previously fine-adjusted track marking position:

1Press CANCEL.

2Select the track number by pressing </4 or ¢/>

and press £.

3Return to step 4.

6Press ENTER.

The change made above is entered temporarily in the memory. The display shows “EDITING”.

1 2 3 4 5

6 7

7Press 0 to eject the MD.

The data in the memory is written in the MD before it is ejected.

The display shows “UTOC writing” during MD write operation.

•Be careful not to apply impact to the MD recorder during writing data in the memory in the MD. Otherwise the recording may be unplayable later.

•The data in the memory is written in the MD also when the power is switched to the STANDBY mode while “EDITING” is being displayed.

To exit editing:

Press EDIT before pressing ENTER in step 6 .

To restore the original track from the divided tracks:

Use the JOIN editing function.

See “Joining tracks (JOIN)” on page 30.

Français Deutsch

29 XM-EX90

Image 29

Contents XM-EX90 Important for Laser Products For safe use, observe the following WelcomeImportant cautions Table of Contents Front panel Parts IndexDisplay Digital in jacks Rear panelAnalog input/output jacks Normal control button panel Remote control unitMD Control buttons Numeric keysMD editing control buttons Character input keyboardSupplied Accesories Setting Up the SystemAudio pin cords Amplifier/TunerCD player Optical digital cableOpen the battery case Remote control batteriesClose the battery case Load the batteriesRemote control operation MD playback Basic operation PlaybackLoad an MD Mini Disc Press Ü/8To skip to the beginning of a track To let playback pause temporarilyFast forward/fast reverse To select and play a desired trackWhen a track has already been selected Switching the displayed informationTo cancel repeat playback Press Repeat to select the repeat play modeRepeat playback Press £Select desired track numbers using Numeric keys Press Play Mode to select ProgramProgram playback Load an MDTo exit program play mode To cancel programmed tracksTo check the programmed tracks and their order If you make a mistake in programmingTo exit random play mode Press Play Mode to select RandomRandom playback To repeat random playbackMD recording Basic operation RecordingLoad a recordable MD Mini Disc Press REC Pause Select the input by pressing InputTo stop recording To adjust the analog input levelTo let recording pause temporarily To display the remaining recording timeManual track marking Track markingAutomatic track marking Load a recordable MD Mini Disc Prepare the CD player CD recordingPress CD REC Synchronized recording of the analog inputRadio or tape recording Press 4 or ¢ to adjust the input levelPress Input to select the analog input With the cassette deck, press Û or ÜMD editing functions Editing FunctionsDividing a track Divide Erasing a track EraseAssigning titles Combining editing functionsPress Edit to select Divide Dividing a track DividePress SET Play the track to be dividedTo restore the original track from the divided tracks Fine-adjust the track marking position by Pressing /4 or ¢Press Enter Press 0 to eject the MDSelect the track to be joined with the previous Track Joining tracks JoinPress Edit to select Join Decrements by Select the track number to be moved, then Moving a track MovePress Edit to select Move Deutsch Select the track number to be erased, then Erasing a track ErasePress Edit to select Erase Memory. The display shows Editing Press Edit to select ALL Erase Erasing all tracks in an MD ALL EraseData in the memory is written in the MD before it is Load a recorded MD Mini Disc Assigning titles to an MD and its tracksPress Title Cursor starts blinkingInput the title To correct input characters To cancel all input charactersInput the track title Assigning titles while playback or recordingAfter start of playback or recording of a track Français Deutsch Switching the Power button’s control mode Remote controlling the amplifier/tunerAmplifier/tuner mode MD recorder modeAmplifier/tuner control buttons Remote controlling the amplifier/tuner+/R, -/L Numeric keys 1 to 10, +10CD player control buttons Remote controlling the CD player and cassette deckOperation Examples Select a track number using the numeric keys 8 9Program other tracks by repeating steps 3 Press £ Play the source to be recorded Press ª or £Compu Link Timer operation Single remote control unitShortcut playback Synchronized recordingScms Serial Copy Management System Rule on Digital CopyingRole of the cartridge About MD Mini DiscTwo disc types Playback-only MDSound skip guard memory Utoc User Table Of ContentsAtrac Adaptive TRansform Acoustic Coding Error Messages Description Treatment MD Error MessagesMD Restrictions Symptom CausePeriodical maintenance Installation locationHandling MDs To maintain high quality audio for a long periodAdditional Information TroubleshootingSymptom Cause Treatment Digital SpecificationsHOW to Locate Your JVC Service Center Limited Warranty AUDIO-1 JVC 0598TTMWSTOZK