JVC XM-EX90 manual Assigning titles while playback or recording, Input the track title

Assigning titles while playback or recording

Track titles can be assigned as you play or record the tracks.

1 After start of playback or recording of a track,

TITLE	press TITLE.
	1	2	3	4	5
	6

Blinks.

2Input the track title.

SMALL	1 Select the character case.
LETTER
	Each press of SMALL LETTER switches the character
	case.
	Lowercase letters can be input when the button is lit
	in green, and uppercase letters can be input when the
	button is not lit.

2Input characters by pressing the character input keys. Up to 64 characters can be input per title.

SPACE

3Press ENTER.

ENTER	The characters input above are entered temporarily in
	the memory. The display shows “EDITING”.

•If it is during playback, the track will be played repeatedly until ENTER is pressed.

Pressing ENTER stops the playback.

•If it is during recording, recording continues even after ENTER is pressed.

If ENTER is not pressed until the end of the track, the characters input before the end of the track are recorded.

4Press 0 to eject the MD.

INPUT

The data in the memory is written in the MD before it is ejected.

The display shows “UTOC writing” during MD write operation.

•Be careful not to apply impact to the MD recorder during writing data in the memory in the MD. Otherwise the recording may be unplayable later.

•The data in the memory is written in the MD also when the power is switched to the STANDBY mode while “EDITING” is being displayed.

Français Deutsch

41 XM-EX90