WASHING PROCEDURE
TO WASH
1.Before starting to wash, proceed as follows, Connect the water supply
hose and open the water tap.
•Lay the drain hose down toward
a sinkhole. (In case no drain pump)
•Place the drain hose in sink or bath. (In case no drain pump)
•Connect the power cord to the power supply outlet.
TO SPIN DRY
1.Transfer the clothes into the spin basket and arrange the clothes evenly.
2.Be sure to replace the safety
cover and close the inner lid.
safty cover
TO RINSING
1. Set the cycle selector KNOB to
‘WASH.RINSE’. | Wash/Rinse |
| Wash | ||
|
|
|
|
| |
(In the case of |
| Drain Rinse |
| Drain | |
|
| ||||
drain pump |
|
| |||
|
|
|
|
| |
‘WASH’) | CYCLE SELECTOR | CYCLE SELECTOR |
2.Supply the proper amount of water
so as not to delete one space overflow
the top of the washing tub.
0
2.Set the WASH SELECTOR KNOB to the desired mode.
3.Set the WTER SELECTOR KNOB to the desired mode. (FOR
Soft Normal
WASH SELECTOR
Wash Spin
WATER SELECTOR
3. Close the spin |
dryer lid. |
15 3
126
9
WASH TIMER
4. Set the CYCLE SELECTOR KNOB to “WASH.RINSE”(in. case drain pump WASH)
Wash/Rinse | Wash | ||
| Drain Rinse |
| Drain |
|
| ||
|
|
CYCLE SELECTOR | CYCLE SELECTOR |
4. Set the SPIN DRY |
TIMER |
0
5 1
42
3
SPIN DRY TIMER
Wash/Rinse | Wash | ||
1. Keep supplying |
|
|
|
|
|
|
5. Fill water in the wash tub and add the detergent.
6. Load laundry in the wash tub and fill water to proper water level.
7.Set the WASH TIMER
8.After washing, set the CYCLE SELECTOR
KNOB to 'DRAIN' for drain.
0
15 3
126
9
WASH TIMER
water(adjust water | Drain Rinse | Drain | |
|
|
| |
pressure to ensure |
|
|
|
that the amount of CYCLE SELECTOR | CYCLE SELECTOR | ||
water supplied does not exceed the amount | |||
of water drained.) |
|
|
|
|
| 0 |
|
2. Set the WASH TIMER |
| 15 | 3 |
|
|
| |
6~8 minutes. |
| 12 | 6 |
|
| ||
|
| 9 |
|
3. As soon as the |
| WASH TIMER |
|
| 0 |
| |
WASH TIMER |
|
| |
| 15 | 3 | |
shuts off, turn off |
|
|
|
the water tap. |
| 12 | 6 |
|
|
|
9
WASH TIMER
3