Samsung SW75V9W Control Panel, Power Button, Start/Pause, Program, Rinse Button, rinse cycles

CONTROL PANEL

For more details, see control panel of your washing machine.

14 13 12 11 10 9 8 7 6 5 4 3 2 1

1	POWER BUTTON	Press this button once to turn the power on.
		Press it again to turn the power off.
	START/PAUSE	Press to pause and restart programs. To change the washing procedure
2		during an operation, press this button to stop the operation, and press it
	BUTTON
		again to restart the washer after changing the washing procedure.
3	PROGRAM	Press this button repeatedly to cycle through the washing programs:
	SELECTION BUTTON [Fuzzy  Blanket  Wool  Memory  Easy  Quick  Super Clean  Water Saving]

4WASH BUTTON Press this button to only perform a wash cycle or to adjust the wash time.

5 RINSE BUTTON	Press this button to perform only the rinse cycle or to adjust the amount of
	rinse cycles.

Press this button to only perform a spin cycle or to adjust the spin time.

6 SPIN BUTTON When only a spin cycle is selected, the spin time will be different from the total remaining time. This is because the total remaining time includes the

actual spin time, the time for the water to drain and the washer to stop.

When the wash is finished, the warning lamp lights up on the filter check.

7 FILTER CHECK When the door is opened, it turns off. (This is not a fault.)When the Magic filter is clogged, foreign materials may start sticking to the laundry. To ensure a

clean wash, please remove foreign materials from the filter after every wash.

This is a device to protect children from being accidentally hurt while playing with the washer.

		•	How to start the Child-Lock function:
		-	Press the “Power” button to go to an initial washing mode.
	CHILD-LOCK	-	By pressing “Start/Pause” button, you start washing and in case Child
8			Lock function is needed during the laundry
	FUNCTION
		-	Press both the “Rinse” and “Spin” buttons at the same times.(for 3 seconds)
			(Note: You cannot perform the function without the “Power” button on. If the
			Child Lock function is activated, the Child Lock icon blinks.)
		•	To release the function of Child-Lock: In case the “Child-Lock” is
			programmed, press both the “Rinse” and “Spin” buttons at the same time.

9	REMAINING TIME,	The display shows the remaining wash time, the reserved delayed start
	DELAY START TIME,

ERROR DISPLAY time and error messages.

01 SETTING UP YOUR WASHER

setting up your washer _11