setting up your washer
Delay Start
Use this to specify a time for the wash cycle to start, for example, when you need to go out and are unable to monitor the washer.
1.Press the Power button to turn the washer “On”.
2.Press the Delay Start button once.
You may set the delay end time using the Delay Start button from between 3 to 18 hours.
3.Press the Start/Pause button and add the appropriate amount of detergent into the detergent drawer.
4.Close the lid.
The wash will finish by the set time.
Add detergent and softener according to the water level and close the lid.
•Detergent must be added into the detergent drawer.
•If detergent is added onto the laundry directly, some clothes may become discolored because the start has been delayed.
•To cancel a Delay Start, press the Power button.
Air Turbo
This program saves you valuable time, ensuring that your clothes dry faster than from line drying.
1.Press the Power button to turn the washer “On”.
2.Press the Air Turbo button.
Each time the Air Turbo button is pressed, the operations are performed in the following order: 30 Min 15 Min Off 30 Min
3.Close the lid.
4.Press the Start/Pause button.
•This can be selected as an additional option for all programs except for Wool program.
•The Air Turbo function is only available when spin cycle is selected.
•Select this when you want to
Child Lock
This function is for protecting children, the elderly and the frail.
1.Press the Power button.
2.To activate the Child Lock function, press and hold both the Rinse and Spin buttons down simultaneously for 3 seconds. (If the Child Lock function is activated, the Child Lock icon blinks.)
3.Operations after activating the Child Lock function.
•Even if the Child Lock function is activated, every button works until the door opens.
•When you open the door during the Child Lock is being activated, the alarm sounds and an error message appears. In 30 seconds, draining begins automatically. However, if you close the door within 30 seconds, water will not be drained. (Displayed error message “ CL”, “ dE ”).
•To add laundry after activating the Child Lock function, you must deactivate the Child Lock function.
4.To deactivate the Child Lock function, press and hold both the Rinse and Spin buttons simultaneously for 3 seconds again. (If the Child Lock function is deactivated, the Child Lock icon is turned off.)
5.To clear “CL” display, after draining is complete, close the door of the washing turn the power off and then on.
-This function is for preventing injury and malfunction of the product because of
CAUTION - | inappropriate operations or actions by children, the elderly or the frail. |
If the door opens when the Child Lock function is activated, the water is drained by | |
| force to prevent children from drowning. |
- | To add laundry after activating the Child Lock function, you must deactivate the Child Lock. |
- | Even if the power is turned off and then on when the Click Lock is activated, the Child |
| Lock remains activated. |
- | Once Child Lock is activated, even when the power is turned off, if the door is opened, |
| water is automatically drained in 30 seconds. |
- | The Child Lock function cannot be deactivated when CL is displayed. (However, the |
| Child Lock function can be deactivated when the dE error is displayed.) |