Washing a Load of Laundry
Washing clothes using Fuzzy Logic
Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Logic" automatic control system. When you select a wash program, the machine will set the correct temperature, washing time, and washing speed.
To wash clothes using the Fuzzy Logic programs:
1.Turn on your sink's water faucet.
2.Press the 
(On/Off) button.
3.Open the door.
4.Load the articles one at a time loosely into the drum, without overfilling.
5.Close the door.
6.Add the detergent, softener, and
Note:
It is only necessary if your clothing is heavily soiled.
7.Turn the Fuzzy Control dial to select the
appropriate program for the type of clothes Cotton, Coloureds, Synthetics, Delicates, Wool, Handwash, Quick, Duvet, Bedding, Towel, Curtain.
You will see the indicators light up on | Start | |
Pause | ||
the control panel. |
8.At this time, you can control the wash temperature, rinsing times, spin speed, delay time by pressing the appropriate option button.
9.Press the Start/Pause button on the Fuzzy Control dial and the wash cycle will begin. The process indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option (Q1636 ,Q1436, Q1435)
1.Within 5 minutes of starting a wash, it is possible to add/remove laundry items to the load.
2.By depressing the START/PAUSE button, the door is unlocked.
3.The door can NOT be opened when the water is too HOT or the water level is too HIGH.
4.After closed the door, depressing the START/PAUSE button again will restart the washing porcess.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1.Open the door.
2.Remove laundry.
Washing a Load of Laundry
Washing clothes manually
You can wash clothes manually without using the Fuzzy Logic feature. To do so:
1.Turn the water supply on.
2.Press the 
(On/Off) button on the washing machine.
3.Open the door.
4.Load the articles one at a time loosely into the drum, without overfilling.
5.Close the door.
6.Put the detergent and, if necessary, softener or prewash detergent, in the appropriate compartments.
7.Press the Temperature button to select the temperature (cold water, 30˚C, 40˚C, 60˚C, 95˚C)
8.Press to rinse button to select the required number of rinse cycles. Maximum number of rinse cycles is five.
The washing duration will be prolonged accordingly.
9.Press the Spin button to select the spin speed.
Note: The rinse hold program allows you to take clothes that are dripping wet out of the washing machine.
: No Spin, 
: Rinse Hold.
10.Press the button repeatedly to cycle through the available delayed start options (from 3 hour to 24 hours in one hour increments). Displayed hours means the time of finished
11.Press the Start/Pause button and the machine will begin the cycle.
Using Delay Start
You can set the washing machine to finish your wash automatically at a later time, choosing from 3 to 24 hour delay (in 1 hour increments). Displayed hours means the time of finished
To do this:
1.Manually or automatically set your washing machine for the type of clothes you are washing.
2.Press the Delay Start button repeatedly until the delay time is set.
3.Press the Start/Pause button. The Delay Start indicator will light, and the clock will begin counting down until it reaches your finish time.
4.To cancel Delay Start, press the 
(On/Off) button, then turn the washing machine on again.
10 SAMSUNG Washing Machine Owner’s Instructions | SAMSUNG Washing Machine Owner’s Instructions 11 |