SET
8 
–SELECT +
4 
5 
SET
8 
SLEEP
8.Press the SET button.
The volume level blinks on the display.
9.Press the SELECT + or – button to set the volume level.
10.Press the SET button.
The display returns to the display before you set the timer.
Before Turning the Unit Off
•Check that the selected source is ready.
•If you will be recording a source while you are out, set the volume to 0.
To turn the Timer off, press the SHIFT button and then the TIMER button. The Timer indicator on the display goes out.
Setting the Sleep Timer
Use the Sleep Timer to turn the Unit off after a certain number of minutes when it is playing. By setting this timer, you can fall asleep while listening to music and know your Unit will turn off by itself rather than play all night.
o You can only set the Sleep Timer when the Unit is on and a source is playing.
To set the Sleep Timer, follow this procedure:
1. With the System on and a source playing, press the SLEEP button on the Remote Control.
A.BASS EX S.MODE
SLEEP
2.Set the length of time you want the source to play before shutting off.
•Each time you press this button, it changes the number of minutes shown on the display in this sequence:
= 10 =20 = 30 =60 = 90 = 120 = Cancelled
When the number of minutes you want shows on the display, just wait 5 seconds until the number of minutes stops blinking, and is lighted steadily.
The Unit is now set to turn off after the number of minutes you set.
To Change the Sleep Timer Setting
Press the SLEEP button until the number of minutes you want appears on the display.
To Cancel the Sleep Timer Setting
Press the SLEEP button until the “SLEEP” indicator goes off on the display.
Turning off the Unit also cancels the Sleep Timer.
25