Recessed area instructions
This washer may be installed in a recessed area or closet.
The installation spacing is minimum allowable.
Additional spacing should be considered for ease of installation and servicing.
If closet door is installed, the minimum air openings in top and bottom are required. Louvered doors with air openings in top and bottom are acceptable.
Companion appliance spacing should be considered.
If you need
00
l Additional clearances for wall, door and floor moldings may be required.
Closet door
II +Q=$6
cm d max.)
4’
(10.2 cm)
Closet door
ii.6 cm)
T
+_
3’
(7.6 cm)
T-
assistance...
Call your dealer or local authorized service company.
When you call, you will need the washer model number and serial number. Both numbers are on the serial/rating plate located under the washer lid and on the top of the washer.
Front view | Side view |
(door not shown) |
|
| Minimum installation spacing |
Front view
Part No. 3358974 |
|
|
| Printed in U.S.A. |
0 1993 Whirlpool Corporation | Prepared by Whirlpool Corporation, | Benton Harbor, Michigan | 49022 |