Tools needed for installation, Now start

Tools needed for installation:

level

pliers

wrench

flat-blade screwdriver

utility

knifescissors

Parts supplied for installation:

Remove parts from packages. Check that all parts were included.

1 hose clamp

2 inlet hoses

4 flat water hose washers

2 front-leveling legs with nuts

1 drain hose

PAGE 3

Electrical requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3-prong outlet. Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Do Not ground to a gas pipe.

Check with a qualified electrician if you are not sure the washer is properly grounded.

Do Not have a fuse in the neutral or ground circuit.

A 120-volt, 60-Hz, AC-only, 15- or

20-ampere fused electrical supply is required. (Time-delay fuse or circuit breaker is recommended.) It is recommended that a separate circuit serving only this appliance be provided.

Recommended ground method

For your personal safety, this appliance must be grounded. This appliance is equipped with a power supply cord having 3-prong ground plug. To minimize possible shock hazard, the cord must be plugged into a mating

3-prong ground-type outlet, grounded in accordance with local codes and ordinances. See Figure 1. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have a properly grounded 3-prong outlet installed by a qualified electrician.

WARNING – Improper connection of the equipment-grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

	3-prong ground-
3-prong	type outlet
ground
plug

ground prong

power supply cord

Figure 1

Now start...

With washer in laundry area.

WARNING

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

shipping tape

Pull the strap completely

out of the washer.

1. Remove tape that covers shipping strap. Pull to completely remove the shipping

strap with 2 cotterpins from the inside of the washer.

Pull firmly to remove the end of shipping strap from

the back of the washer. The shipping strap plug must be completely removed from the washer for the self-leveling legs to be released.

Save the shipping strap for use in Step 6.