Indesit WD 12 X manual Hinge Supports Hinges Magnet, Rubber plug, Magnet plate

Mounting the wooden panel onto the door and inserting the machine into cabinets:

In the case where the machine must be shipped for final installation after the wooden panel has been mounted, we suggest leaving it in its original packaging. The packaging was designed to make it possible to mount the wooden panel onto the machine without removing it completely (see figures below).

lavabiancheria
washing			machine
			laver
machine				6
waschmaschine				4
				5
				3
				2
				1
Lato porta
Doo	r side
		rte
Cote po
Tur	seite

A

C

lava	bianc			heria
			machine
washing
				laver
mach		ine			6
waschmaschine					4
					5
					3
					2
Lato porta
Door side
Cote

E

Instructions for the fitter

The wooden panel that covers the face of the machine must not be less than 18 mm in thickness and can be hinged on either the right or left. For the sake of practicality when using the machine, we recommend that the panel be hinged on the same side as the door for the machine itself - the left.

Door Mounting Accessories

(Fig. 1-2-3-4-5)

N° 2 Hinge Supports

N° 2 Hinges

Fig. 1 Fig. 2

N° 1 Magnet N° 1 Magnet plate

Fig. 3 Fig. 4

B

D

N° 1 Rubber plug

Fig. 5

-No. 6 type A self-threading screws, l =13 mm.

-No. 2 type B metric, countersunk screws, l =25; for fastening the magnet plate to the cabinet.

-No. 4 type C metric screws, l =15 mm; for mounting the hinge supports to the cabinet.

-No. 4 type D metric screws, l =7 mm; for mounting the hinges on the supports.

N° 1 Spacer

Fig. 4/B

13Instructions for installation and use