JVC KD-G202, KD-G201 manual FM1 and FM2 87.5 MHz 108.0 MHz FM3 65.00 MHz 74.00 MHz

RADIO OPERATIONS

ENGLISH

Listening to the radio

You can use either automatic searching or manual

searching to tune in to a particular station.

Searching for a station automatically: Auto search

1 Select the band (FM1 – 3, AM).

Each time you press the

button, the band changes as follows:

FM1 FM2 FM3 AM

Lights up when receiving an FM stereo broadcast with sufficient signal strength.

Selected band appears.

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2 Start searching for a station.

To search for stations of higher frequencies

To search for stations of lower frequencies

When a station is received, searching stops.

To stop searching before a station is

received, press the same button you have pressed for searching.

Note:

FM1 and FM2: 87.5 MHz – 108.0 MHz FM3: 65.00 MHz – 74.00 MHz

Searching for a station manually: Manual search

1 Select the band (FM1 – 3, AM).

Each time you press the button, the band changes as

follows:

FM1 FM2 FM3 AM

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2 Press and hold ¢ or 4 until “M” (manual) starts flashing on the display.

8