2
Digital Graphic Display
The display window shows the estimated time remaining in the cycle after the Start/Pause button is pressed. The estimated time remaining may fl uctuate as the cycle progresses.
The Drying light will illuminate and remain lit until the cycle is complete. When your dryer is in the
When the cycle is complete, “END” appears in the display panel until the dryer door is opened, the Power, Close or Start button is pressed or about 5 minutes have passed. If your dryer is paused during a cycle, the indicator lights will blink until the Start/ Pause button is pressed.
02 operating Instructions,
3
Dry Level Selection Button
To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles, press the Dry Level button. An indicator light will illuminate next to the desired dryness level.
Press the button repeatedly to scroll through the settings. Larger or bulkier loads may require the More Dry setting for complete dryness.
The Less Dry setting is best suited for lightweight fabrics or for leaving some moisture in the clothing at the end of the cycle. Damp Dry is designed to partially dry items. Use for items that lay fl at or hang to dry.
tips
4
Temp Selection Button
To select the correct temperature for the load, press the Temp button. An indicator light will illuminate next to the desired temperature. Press the button repeatedly to scroll through the settings.
High – For sturdy cottons or those labeled Tumble Dry.
Medium – For permanent press, synthetics, lightweight cottons, or items labeled Tumble Dry Medium.
Low – For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm. Extra Low – Provides the lowest heated dry temperature possible.
|
| When using Manual Dry cycles, time can be adjusted by pressing the Time | |
5 | Time Selection | Selection button. | |
Button | During the Sensory Dry cycle, the time light indicator is off because exact drying | ||
| |||
|
| times are determined by fl uctuating humidity levels. | |
|
|
| |
|
| When the cycle is complete, a chime will sound. | |
6 | Signal Selection | When the Wrinkle Prevent option is selected, the chime will sound intermittently. | |
Button | Adjust the volume of the chime or turn it off by pressing the Signal button. | ||
|
Press the button repeatedly to scroll through the choices.