Samsung DV219AE*, DV219AGW Troubleshooting, Check These Points if Your DRYER…, Problem Solution

troubleshooting

CHECK THESE POINTS IF YOUR DRYER…

PROBLEM	SOLUTION
Doesn’t run.	• Be sure the door is latched shut.
	• Be sure the power cord is plugged into a live electrical outlet.
	• Check the home’s circuit breaker and fuses.
	• Press the Start/Pause button again if the door is opened during the cycle.
Doesn’t heat.	• Check the home’s circuit breaker and fuses.
	• Select a heat setting other than Air Fluff.
	• On a gas dryer, check that the gas supply is on.
	• Clean the lint filter and exhaust duct.
	• Dryer may have moved into the cool-down phase of the cycle.
Doesn’t dry.	• Check all of the above, plus...
	• Be sure the exhaust hood outside the home can open and close freely.
	• Check exhaust system for lint buildup. Ducting should be inspected
	and cleaned annually.
	• Use a 4” rigid metal exhaust duct.
	• Do not overload. 1 wash load = 1 dryer load.
	• Sort heavy items from lightweight items.
	• Large, bulky items like blankets or comforters may require
	repositioning to ensure even drying.
	• Check that the washer is draining properly to extract adequate water
	from the load.
	• Load may be too small to tumble properly. Add a few towels.
Is noisy.	• Check the load for objects such as coins, loose buttons, nails, etc.
	Remove promptly.
	• It is normal to hear the dryer gas valve or heating element cycle on
	and off during the drying cycle.
	• Be sure the Dryer is leveled properly as outlined in the installation
	instruction.
	• It is normal for the Dryer to hum from the high velocity of air moving
	through the dryer drum and exhaust system.
Dries unevenly.	• Seams, pockets, and other similarly heavy areas may not be
	completely dry when the rest of the load has reached the selected
	dryness level. This is normal. Select the More Dry setting if desired.
	• If one heavy item is dried with a lightweight load, such as one towel
	with sheets, it is possible that the heavy item will not be completely
	dry when the rest of the load has reached the selected dryness level.
	Sort heavy items from lightweight items for best drying results.
Has an odor.	• Household odors from painting, varnishing, strong cleaners, etc.
	may enter the dryer with the surrounding room air. This is normal as
	the Dryer draws the air from the room, heats it, pulls it through the
	tumbler, and exhausts it outside.
	• When these odors linger in the air, ventilate the room completely
	before using the Dryer.
Shuts off before load is dry	• Dryer load is too small. Add more items or a few towels and restart
	the cycle.
	• Dryer load is too large. Remove some items and restart the dryer.
	troubleshooting _27

05 troubleshooting

DV219AGW-02691A_EN.indd 27

2009-01-30 ¿ÀÈÄ 6:19:30