Samsung DV219AE* Important to Installer, Location Considerations, Alcove or Closet Installation

Page 9

If the new Dryer is installed into an existing exhaust system you must make sure:

The exhaust system meets all local, state, and national codes.

That a flexible plastic duct is not used.

To Inspect and clean all lint buildup from inside the existing duct.

The duct is not kinked or crushed.

The exhaust hood damper opens and closes freely.

The static pressure in any exhaust system must not exceed 0.83 inches of water column, or be less than 0.

This can be measured while the Dryer is running with a manometer at the point where the exhaust duct connects to the Dryer. A no-heat setting should be used. The Dryer tumbler should be empty and the lint filter clean.

IMPORTANT TO INSTALLER

Please read the following instructions carefully before installing the dryer. These instructions should be kept for future reference.

REMOVE THE DOOR FROM ALL DISCARDED APPLIANCES TO AVOID THE DANGER OF A CHILD WARNING SUFFOCATING.

LOCATION CONSIDERATIONS

The dryer should be located where there is enough space at the front for loading the Dryer, and enough space behind for the exhaust system. This Dryer is factory-ready for rear exhaust. To exhaust out the bottom or the left, use the accessory exhaust kit. Instructions are included with the kit. It’s important to make sure the room has enough fresh air. The Dryer must be located where there is no air-flow obstruction.

On gas Dryers, adequate clearance as noted on the data plate must be maintained to ensure adequate air for combustion and proper Dryer operation.

THE DRYER MUST NOT BE INSTALLED OR STORED IN AN AREA WHERE IT WILL BE EXPOSED TO WATER AND/OR WEATHER. THE DRYER AREA IS TO BE KEPT CLEAR OF COMBUSTIBLE MATERIALS, GASOLINE, AND OTHER FLAMMABLE VAPORS AND LIQUIDS. A DRYER PRODUCES COMBUSTIBLE LINT. THE AREA AROUND THE DRYER SHOULD BE KEPT LINT-FREE.

ALCOVE OR CLOSET INSTALLATION

The Dryer must be exhausted to the outside to reduce the risk of fire when installed in an alcove or

WARNING closet.

No other fuel-burning appliance should be installed in the same closet as the Dryer.

WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED TO THE OUTDOORS. See EXHAUST INFORMATION section.

Minimum clearances between the Dryer and adjacent walls or other surfaces are: 2” in front, 17” on top, 1” on either side, and 2.375” in the back.

The closet front must have two unobstructed air openings for a combined minimum total area of 72 in² with 3” minimum clearance on the top and bottom. A louvered door with equivalent space clearance is acceptable.

01 installing your dryer

installing your dryer _9

DV219AGW-02691A_EN.indd 9

2009-01-30 ¿ÀÈÄ 6:19:22

Image 9
Contents Gas and Electric Dryer Features What YOU Need to Know about Safety Instructions Safety instructionsImportant Safety Symbols and Precautions Property damageWhat to do if YOU Smell GAS Safety instructions Contents Tools Needed for Installation Installing your dryerControl panel Door Adjustable legs See Dryer ExteriorDucting Requirements Recommended Use only for short-run installationElectric and GAS Dryer Weather Hood TypeImportant to Installer Alcove or Closet InstallationLocation Considerations Exhausting Mobile Home InstallationGAS Requirements Commonwealth of Massachusetts installation instructionsGrounding Electrical RequirementsGas models Electric modelsGas models U.S. and Canada Electrical ConnectionsElectric models U.S. only Electric models Canada OnlyReplacement Parts and Accessories InstallationTools and Parts Models Wire system connections GAS Models only DV219AGW Final Installation ChecklistDon’t let a poor exhaust system slow drying by Dryer Exhaust TipsDoor Reversal Overview of the Control Panel Operating Instructions, tipsCycle Selector Digital GraphicAdjust Time Signal SelectionDry Level Selection ButtonChild Lock Setting/ReleasingInstalling the drying rack Suggested Items Suggested TEMP. SettingsRack DRY Clean the Lint Filter Load the Dryer ProperlyGetting Started Care and cleaning Special laundry tips Special Laundry TipsThings to Avoid Troubleshooting Problem SolutionCheck These Points if Your DRYER… Information Codes Error Display Meaning SolutionFabric Care Chart AppendixWash Cycle Special Instructions Laundering Specifications Protecting the EnvironmentDeclaration of Conformity Cycle Cycle ChartSamsung Dryer Limited Warranty to Original Purchaser WarrantyDV219AGW-02691AEN.indd Questions or COMMENTS? Secadora a gas y eléctrica Características LO QUE Necesita Saber Sobre LAS Instrucciones DE Seguridad Instrucciones de seguridadSímbolos Y Precauciones DE Seguridad Importantes La muerteQUÉ Hacer SI Percibe Olor a GAS No se siente encima de la secadora Instalación DE LA Secadora ContenidoHerramientas Necesarias Para LA Instalación Instalación de la secadoraConsulte Exterior DE LA Secadora Panel de control Puerta Patas ajustablesSecadora Eléctrica Y a GAS Requisitos Para EL Tendido DE ConductosConsideraciones Acerca DE LA Ubicación Importante Para EL InstaladorDrenaje Instalación EN Casas RodantesRequisitos EN Cuanto AL GAS Conexión a Tierra Requisitos EléctricosModelos a gas Modelos eléctricosModelos a gas EE.UU. y Canadá Conexiones EléctricasModelos eléctricos Sólo EE.UU Modelos eléctricos Sólo CanadáReemplazo DE LAS Piezas Y LOS Accesorios InstalaciónHerramientas y piezas Modelos Estadounidenses Conexiones de sistemas de 3 Cables Sólo Modelos a GAS DV219AGW Lista DE Verificación Final DE LA InstalaciónSugerencias Acerca DEL Drenaje DE LA Secadora Inversión DE LA Puerta Selector de Ciclos Descripción General DEL Panel DE ControlPantalla gráfica Selección SignalDigital Botón deSeguro Para Niños Configuración/LiberaciónRack DRY Secado EN Estante Instalación del estante de secadoPrendas Sugeridas Opciones DE TEMP. Sugeridas Limpie EL Filtro Para Pelusas Cargue LA Secadora DE Manera AdecuadaCómo Comenzar Cuidado y limpieza Sugerencias para prendas especiales Sugerencias Para Prendas EspecialesArticulos QUE SE Deben Evitar Controle Estos Puntos SI SU SECADORA… Problema SoluciónGuía de solución de problemas Pantalla DE Significado Solución ErrorCódigos DE Información Tabla DE Indicaciones DEL Tejido ApéndiceProtección DEL Medio Ambiente Declaración DE ConformidadEspecificaciones Ciclo Tabla DE CiclosSamsung GarantíaDV219AGW-02691AMES.indd ¿TIENE Preguntas O COMENTARIOS?

DV219AE*, DV219AG*, DV219AGW specifications

The Samsung DV219AGW, DV219AG*, and DV219AE* series of dryers are designed to combine efficiency, elegance, and advanced drying technologies to enhance the laundry experience. These models are characterized by their sleek designs, intuitive controls, and a variety of features that cater to the needs of modern households.

One of the standout features of the Samsung DV219AGW and its counterparts is the innovative Moisture Sensor Technology. This system detects the moisture level in the clothes and automatically adjusts drying time, ensuring garments are neither over-dried nor under-dried. This not only protects fabrics but also saves energy, making these dryers an eco-friendly option for consumers.

The Samsung DV219 series is equipped with several drying cycles to accommodate different fabric types. Options like Normal, Heavy Duty, Delicate, and Timed Dry allow users to customize the drying process based on their specific needs. Additionally, the Wrinkle Prevent feature helps reduce wrinkles by intermittently tumbling clothes after the cycle ends, giving users peace of mind when pulling items out of the dryer.

Energy efficiency is another critical aspect of these dryers, with many models boasting Energy Star certification. This means they meet strict energy efficiency guidelines set by the U.S. Environmental Protection Agency, ultimately resulting in reduced utility bills and a smaller carbon footprint.

Another notable characteristic is the Smart Dry System, which intelligently controls drying settings based on load sizes and types. This smart technology optimizes performance while also being user-friendly, ensuring a smooth experience for individuals of all technical skills.

The design of the Samsung DV219 series models emphasizes practicality with features such as a large-capacity drum, providing ample space for larger laundry loads. Additionally, the models often include easy-to-use digital displays, allowing users to monitor settings and remaining dry time effortlessly. The dryers also feature a filter cleaning indicator, reminding users to clean the lint filter for optimal performance.

In summary, the Samsung DV219AGW, DV219AG*, and DV219AE* dryers are exemplary in their combination of innovative technologies, energy efficiency, and user-friendly features. They not only prioritize garment care but also align with environmentally conscious values, making them an excellent choice for modern laundry needs.