Samsung DV210AEW, DV220AEW user manual Operating Instructions, tips, Overview of the Control Panel

operating Instructions, tips

OVERVIEW OF THE CONTROL PANEL

12 3 4 5 67 8 9 10

		To select a cycle, rotate the Cycle Selector dial to the desired cycle.
		The indicator light by the cycle name will illuminate. The Normal, Heavy Duty,
		Perm Press and Delicates cycles are Sensor Dry cycles.
		Sensor Dry automatically senses the moisture in the load and shuts the dryer
		off when the selected dryness level (more dry to damp dry) is reached.
		Normal – Use this cycle to dry loads such as cotton, underwear, and linen.
		Heavy Duty – Use this cycle to get high heat for heavy fabrics such as jeans,
		corduroys, or work clothes.
		Perm Press – Dry wrinkle-free cottons, synthetic fabrics, knits, and
		permanent press fabrics automatically. The cycle minimizes wrinkling by
1	Cycle Selector	providing a longer unheated cool-down period at the end of the cycle.
		Delicates – The Delicates cycle is designed to dry heat-sensitive items at a

low drying temperature.

Time Dry – Time Dry allows you to select the desired cycle time in minutes.

Turn the Cycle Selector dial to Time Dry, then press the Adjust Time up arrow to set the drying time.

		Press the arrow repeatedly to scroll through the time settings.
		Wrinkle Release – The Wrinkle Release cycle will release wrinkles from items
		that are clean, dry, and only slightly wrinkled, such as clothes from a crowded
		closet, suitcase or items that have been in the dryer too long after the cycle
		has ended. Wrinkle Release can be used with any temperature selection.
		Air Fluff – The Air Fluff cycle tumbles the load in room temperature air.
		Time can be added or subtracted from the automatically set times in the
2 Adjust Time		Manual Dry cycles (Time Dry, Wrinkle Release, or Air Fluff cycles).
		To add or subtract time from the cycle, press the Adjust Time arrow pad up
		or down until the desired time is displayed.
		Wrinkle Prevent provides approximately 90 minutes of intermittent tumbling
		in unheated air at the end of the cycle to reduce wrinkling. Press the Wrinkle
3	Wrinkle Prevent	Prevent button to activate this feature.
	Selection Button	The indicator light above the pad will illuminate when Wrinkle Prevent is

selected. The load is dry, and can be removed at any time during the Wrinkle Prevent cycle.

20_ operating Instructions, tips

DV220AE-02810B_EN.indd 20

2010-04-13 ¿ÀÈÄ 2:51:44