Samsung DV209 Operating Instructions, tips, Overview of the Control Panel, Cycle Selector

operating Instructions, tips

OVERVIEW OF THE CONTROL PANEL

12 3 4 5 6 7 8 9 10

		To select a cycle, rotate the Cycle Selector dial to the desired cycle.
		The indicator light by the cycle name will illuminate. The Normal, Heavy Duty,
		Towels, Perm Press and Delicates cycles are Sensor Dry cycles.
		Sensor Dry automatically senses the moisture in the load and shuts the dryer
		off when the selected dryness level (very dry to damp dry) is reached.
		Normal – Use this cycle to dry loads such as cotton, underwear, and linen.
		Heavy Duty – Use this cycle to get high heat for heavy fabrics such as jeans,
		corduroys, or work clothes.
		Perm Press – Dry wrinkle-free cottons, synthetic fabrics, knits, and
		permanent press fabrics automatically. The cycle minimizes wrinkling by
1	Cycle Selector	providing a longer unheated cool-down period at the end of the cycle.
		Delicates – The Delicates cycle is designed to dry heat-sensitive items at a

low drying temperature.

Time Dry – Time Dry allows you to select the desired cycle time in minutes.

Turn the Cycle Selector dial to Time Dry, then press the Adjust Time up arrow to set the drying time.

		Press the arrow repeatedly to scroll through the time settings.
		Wrinkle Release – The Wrinkle Release cycle will release wrinkles from items
		that are clean, dry, and only slightly wrinkled, such as clothes from a crowded
		closet, suitcase or items that have been in the dryer too long after the cycle
		has ended. Wrinkle Release can be used with any temperature selection.
		Air Fluff – The Air Fluff cycle tumbles the load in room temperature air.
		The display window shows the estimated time remaining in the cycle after the
		Start/Pause button is pressed. The estimated time remaining may fluctuate as
		the cycle progresses.
		The Drying light will illuminate and remain lit until the cycle is complete.
	Digital Graphic	When your Dryer is in the cool-down phase, the Cooling light will illuminate.
2		When your Dryer is in the wrinkle prevent phase, the Wrinkle Prevent light will
	Display
		illuminate.

When the cycle is complete, “END” will appear in the display panel until the

Dryer door is opened or the Power key is pushed.

If your Dryer is paused during a cycle, the indicator lights will blink until the

Start/Pause button is pressed.

20_ operating Instructions, tips

DV218AEW-02568A-01_EN.indd 20

2008-12-08 ¿ÀÀü 9:08:46