Electrolux 16820 manual Electronic Drying button, Drying Time button, Delay Timer button, Display

Page 14

Description of the appliance

ELECTRONIC DRYING button

This button enables you to choose the required degree of drying for cottons and synthetics:

Extra dry (not for easy cares)

-Cupboard dry

-Iron dry (not for easy cares)

EXTRA DRY

CUPBOARD

DRY

IRON

DRY

The drying time is automatically adjusted by the

machine: the laundry will be dried to the selected degree of dryness.

DRYING TIME button

If you wish to carry out a timed programme instead of an electronic pro- gramme push the button until the drying time you want appears in the display according to the fabrics (cotton or easy cares) you have to dry.

For COTTON and EASY CARES you can select a drying time from 10 min- utes to 130 minutes.

DELAY TIMER button

The wash programme can be delayed from 30, 60, 90 minutes and then 1 hour by 1 hour up to a maximum of 23 hours.

The button must be pressed after selecting the programme and before pressing the START/PAUSE button.

The figures indicating the delay appear for about 3 seconds in the dis- play. The duration of the selected wash programme is then displayed. After depressing the START/PAUSE button, the machine starts its hourly countdown.

To annul the preset delay, press the START/PAUSE button, then press the DELAY TIMER button until the symbol 0’ is displayed.

Then press the START/PAUSE button again.

Display

The display shows the following information:

•Duration of the selected programme (in minutes), calculated auto- matically on the basis of the maximum recommended load for each type of fabric.

•Selected drying time (max. 130 minutes for cotton and easy cares).

After the programme has started, the time remaining is updated every minute.

14

Image 14

Contents Lavamat Dear customer Contents Programme charts wash and special programmes Automatic washing and drying NON-STOP programmePage Installation Safety instructionsGeneral safety Child safety During usePackaging materials DisposalTips for environmental protection MachineMain features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialPosition Cold = cold wash Programme Option buttonsPosition 40C Easy iron Pause START/PAUSE buttonStart Drying Time button Delay Timer buttonElectronic Drying button DisplayAltering a programme which is running Cancelling a programmeProgramme progress display Opening the door after the programme has started Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Sort of laundry Approximate Dry weightsTypes of fabric and care labels SyntheticsDelicates 40 Detergents and additives Which detergent?Which form? Traditional PowdersGarments not suitable for drying Preparing the drying cycleLoad Sort of laundryModification of the drying time or degree of drying Drying symbols on garment labelsDuration of the drying cycle Fibre residueLoad the laundry How to washMax. load Add detergent and additiveSelection of the desired wash programme Selection of the desired optionsSelection of the Delay Timer option Selection of the Rinse + extra rinse optionStarting the programme At the end of the programme NON-STOP programme How to dryAutomatic washing and drying Drying only Max. loadProgramme chart Wash programmesMax Consumption Tion Special programmesDescrip Max. load Timed DryingDegree of drying Drying time Spin speed Mins 1600Consumption data for timed drying Max Water Energy Duration Load Litres KWh MinutesPeriodical cleaning Exterior Cleaning and maintenanceMaintenance Wash After each washDoor seal Drain pumpWater inlet filter Emergency emptying outSomething not working? Frost precautionsTroubleshooting Problem Possible cause Water inlet hose isProblem Possible cause Solution Distributed E10Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryTechnical data This appliance complies with the following EC directives08705 929 Service & Spare PartsService & Spare Parts Help us to help you Customer careStandard Guarantee Conditions ExclusionsEuropean Guarantee Page Rear view Dimensions of the applianceFront view and side view Remove the polystyrene block from InstallationUnpacking Two plastic bagsLevelling Installation on a suspended floorPositioning Do not connect to a hot water supply Water inlet cold water connection onlyWater drainage Into a drainage standpipeOnto a sink outlet spigot Interest of the environment Electrical connectionsPermanent connection Electrolux plc