How to wash
At the end of the programme
The machine stops automatically. A zero appears on the display. The END light comes on in the programme progress display, the START/PAUSE light is off and the DOOR light is green.
If the OVER DOSING light comes on it indicates that too much deter- gent has been used. At the next wash carefully follow the detergent manufacturer’s instructions. Measure out detergent according to amount, type, degree of soil of fabrics and water hardness.
This light could come on also when the drain filter is blocked.
Turn the selector dial to O.
If the RINSE HOLD option has been selected the RINSE HOLD light remains lit and the DOOR light is red to indicate that the water must be emptied out before opening the door either
To empty out water:
•select the DRAIN programme to empty out the water without spin- ning.
•select the SPIN/DELICATE SPIN programmes for spinning.
•select the SPIN SPEED and depress the START/PAUSE button;
Warning! The programme selector dial must be turned first to O/OFF and then to the DRAIN, SPIN or DELICATE SPIN programmes.
At the end of the programme the selector dial must be turned to posi- tion O/OFF.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas- ant smells.
29