Blomberg WNF 8441 AE20 user manual Adjusting the feet, 11 / EN

Page 11

Installation

•The hose should be attached to a height of at least 40 cm, and 100 cm at most.

•In case the hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure.

•To prevent flowing of dirty water back into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or do not drive it in the drain more than 15 cm. If it is too long, cut it short.

•The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the machine.

•If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

3.6 Adjusting the feet

A WARNING: In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing and vibration problems.

1.Loosen the lock nuts on the feet by hand.

2.Adjust the feet until the product stands level and balanced.

3.Tighten all lock nuts again by hand.

Washing Machine /User’s Manual

11 / EN

 

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Washing Machine WNF 8441 AE20 Important information or useful hints about usage Dear Customer Explanation of symbolsTroubleshooting Important instructions for safety Environment4Installation Maintenance and cleaningService life of your product is 10 years Important instructions for safety and environmentGeneral safety Unplug the product when not in useDisposing of the waste product Compliance with Weee DirectivePackage information Top panel Loading door Control panel Power cableYour washing machine OverviewYour washing machine Package Contents Spin speed rpm/ min., max Your washing machine Technical specificationsStand-by mode power W Off-mode power W Main model code Models ENRemoving the transportation locks InstallationAppropriate installation location Removing packaging reinforcementConnecting to the drain InstallationConnecting water supply 11 / EN Adjusting the feet12 / EN Installation Electrical connectionFitting a different plug 13 / EN 14 / EN PreparationSorting the laundry 15 / EN Preparation Preparing laundry for washingInitial use Things to be done for energy savingLoading the laundry Using detergent and softenerPreparation Correct load capacity 17 / EN Adjusting detergent amountPreparation Use different detergents for coloured and white laundryDo not use bleaching agent and detergent by mixing them Using starchUsing bleaches Do not use softener and starch together in a washing cycle19 / EN Preparation Tips for efficient washingControl panel Display symbolsOperating the product Main programmes Operating the product Preparing the machineProgramme selection Operating the product Additional programmes 23 / EN Temperature selectionOperating the product Special programmes Spin speed selection24 / EN Operating the product Programme and consumption tableOn the panel Operating the product25 / EN 26 / EN Operating the product Auxiliary function selectionPrewash Rinse PlusTime display Changing the selections after programme has started Operating the product Starting the programmeProgress of programme Loading door lockEnd of programme Cancelling the programmeMachine is in Rinse Hold mode Child Lock30 / EN Your machine is equipped with a Standby Mode31 / EN Quick User GuideMonths Cleaning the detergent drawerCleaning the loading door and the drum Draining remaining water and cleaning the pump filter Maintenance and cleaningCleaning the water intake filters Cleaning the body and control panel34 / EN Install the filterPull the emergency draining hose out from its seat Machine does not fill with water Troubleshooting35 / EN Programme cannot be started or selected36 / EN TroubleshootingIt does not rinse well 37 / ENFoam is overflowing from the detergent drawer 38 / ENDetergent residue in the detergent drawer Water pressure is low. Check the water pressureMachine does not start. Nothing appears on the display On / Off button might not be pressed. Press On / Off buttonLoading door may be open. Close the loading door 39 / EN40 / EN Complying Commission Delegated Regulation EU No 1061/201

WNF 8441 AE20 specifications

The Blomberg WNF 8441 AE20 is a cutting-edge washing machine that combines efficiency, advanced technology, and user-friendly design. This model stands out in the market due to its impressive features that cater to the needs of modern households.

One of the main features of the WNF 8441 AE20 is its energy efficiency. It boasts an A+++ energy rating, which means it consumes significantly less energy compared to traditional washing machines. This not only helps reduce electricity bills, but it also supports environmentally friendly practices by minimizing carbon footprints.

The washing machine offers a generous 8 kg load capacity, making it suitable for families of various sizes. Its versatile drum is designed to handle different fabric types, ensuring optimal care for all your washing needs. The WNF 8441 AE20 comes equipped with a variety of washing programs, including quick wash options, eco-friendly cycles, and delicate settings for more fragile items. This flexibility allows users to select the most appropriate setting based on their laundry requirements.

Another notable feature of this washing machine is its innovative ProSmart Inverter Motor. This technology enhances the overall performance while reducing noise levels significantly. Users can expect quiet operation, making it ideal for homes where laundry is done at any time of day or night without disturbing family members.

The machine is designed with user convenience in mind, featuring a large LED display that provides clear information about the selected programs and remaining time. The control panel is intuitive, making it easy for users of all ages to operate the machine without confusion. Additionally, the Delay Start function allows users to schedule washes at their convenience, taking advantage of off-peak energy hours.

In terms of safety and maintenance, the Blomberg WNF 8441 AE20 is equipped with a Self-Cleaning Detergent Drawer that ensures optimal performance while keeping the machine clean and free from mold and bacteria. It also features a child lock function, adding an extra layer of safety for households with young children.

Overall, the Blomberg WNF 8441 AE20 is a highly advanced washing machine that combines performance, efficiency, and convenience. With its array of features and innovative technologies, it stands as a reliable choice for those seeking to enhance their laundry experience while being mindful of energy consumption and care for their garments. It represents the perfect blend of practicality and modern design for any home.
Top Page Image Contents